I see the same problems. Thats why I suggested they add in the firmware that the radio reboot itself after it locks or looses signal over 5 min. I know it would help in my situation. Usually a simple reboot fixes everything.
Jerry ----- Original Message ----- From: "George M. Walden" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 10, 2003 3:14 PM Subject: Re: [smartBridges] trouble with units. > > Ditto, on the Ethernet issue w/ sB2100. We have had 3 customers that needed > replaced (as of now) 3 times each (total of 9 units).....all flaky units > were from the last shipment. Or, should I say, from the first batch of > units that made it to the USA from sB's new contract OEM. > > -George M. Walden > > > on 6/10/03 1:19 PM, Scott Damron at [EMAIL PROTECTED] wrote: > > > Yes, > > My last one would not see the AP and the ethernet and wireless lights > > would go out when you did a search for wireless networks. It would see > > the network when you rebooted, but when you tried to assoc. it, it would > > again loose both lights and freeze. Luckily, we purchased them from > > electro comm and they RMA'd them without trouble. > > > > Scott > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of David Blood > > Sent: Tuesday, June 10, 2003 10:52 AM > > To: [EMAIL PROTECTED] org > > Subject: RE: [smartBridges] trouble with units. > > > > > > With my last shipment of sb2100 I am having terrible issues. I don't > > believe that it is the configuration as I have set up many of these and > > have not had these problems in the past. > > > > Issues. > > > > Ethernet port is flaky. Sometimes it works and sometime it doesn't. No > > distance is not an issue on the ethernet cable. All case less than 50 > > ft and in one case less than 5 ft. It seems to happen when I make any > > configuration change. I can power cycle the unit to get it to come > > back. > > > > When I try to use site survey to list availabe APs I get nothing. When > > it does work then several aps show up. > > > > The air bridges lose associations and then wil not reassociate with out > > a reboot. > > > > > > Anyone else having these issues with the latest shipments? > > > > Kind Regards, > > > > David > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > the body type unsubscribe smartBridges) > > Archives: http://198.63.203.6 > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://198.63.203.6 > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
