Re: [smartBridges] What throughput should I see

[David Berndt]

This doesn't seem right but I dont really know why they are so low. Are you 
pinging the actual radios themselves? Has anyone else done this sort of 
test before? Is is possible the radios arent capable of responding to so 
much data addressed to themselves and you'd get a more realistic throughput 
if you put a pc at the other end and tested against that?

Dave

At 12:58 PM 28/06/2003 +0100, you wrote:
Using Ws_Ping ProPack
With max packet size set to my MTU (1458)
PC to Airbridge gives 11.3Mb
PC to Ap - at 1.2 miles RSSI 60% Link Qual 80%  gives 1.3Mb
A test setup with AppoTotal set as AP on desktop - with no Ethernet
connection -
RSSI 100% Link Qual 95% shows only 1.6Mb

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org