Please make sure the Primary Port is set correctly and the default gateway setting is correct. Kindly refer to this FAQ to understand more: 1) http://www.smartbridges.com/new/support/details.php?id=137 2) http://www.smartbridges.com/new/support/details.php?id=117
So for your setup, the primary port for the following device should be: aPPO1 - Ethernet aPPO2 - Wireless aPPO3 - Ethernet aB - Wireless Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Kelleher Sent: Sunday, June 29, 2003 3:18 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] Remote mgt Has anyone had this problem? T1-rtr-sw-approo1(AP)-approo2(CB)-(eth)-approo3(AP)-Airbridge I can only ocassionally connect to some of the airbridges' (simple mon) from the (sw) location. Others I can not connect at all. Also when I am on the road (dial up) I cannot connect to anything beyond appro 2. All units have static external ips. Timeout problem maybe? What setting should the ethernet/wireless (primary) be set to? And would it have anything to do with it? Mike The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
