Thanks Dave,
Yes, the pings are to the IP set in the radios.
Because they all give similar results ie 1.2 to 1.8MB it could well be due to the test itself being unrealistic.
However, setting the Max packet size to my MTU size of 1458 gives the best result when testing PC - Airbridge, so that's what I stuck with.
Testing to the Gateway gives throughput of about 800k.
Anybody any ideas on the testing method likely to produce most accurate results
Thanks John
This doesn't seem right but I dont really know why they are so low. Are you
pinging the actual radios themselves? Has anyone else done this sort of
test before? Is is possible the radios arent capable of responding to so
much data addressed to themselves and you'd get a more realistic throughput
if you put a pc at the other end and tested against that?
Dave
At 12:58 PM 28/06/2003 +0100, you wrote:
>Using Ws_Ping ProPack
>With max packet size set to my MTU (1458)
>
>PC to Airbridge gives 11.3Mb
>PC to Ap - at 1.2 miles RSSI 60% Link Qual 80% gives 1.3Mb
>
>A test setup with AppoTotal set as AP on desktop - with no Ethernet
>connection -
>RSSI 100% Link Qual 95% shows only 1.6Mb
>
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
