Title: RE: [smartBridges] Tell me your horror stories about the AirBridgeTotal

Sam your kind harsh at times man hundreds out out millions isn't that much lol And also I have yet to hav eprobs with my SB's what is this low speed problem haven't heard of it before?

Chris

-----Original Message-----
From: Ray [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 03, 2003 11:52 PM
To: [EMAIL PROTECTED]

Fill me in on the "low speed" part.  What is it and what does it do?


----- Original Message -----
From: "Sam" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 03, 2003 8:54 PM
Subject: RE: [smartBridges] Tell me your horror stories about the
AirBridgeTotal


> I hope that you live in either a very cool climate (north of the arctic
> circle) or that you don't get any of the units with the resistor placed in
> it by SB that by design (though probably not by intention), causes the
> units to overheat and fail. Otherwise, I can't wait to see the difference
> in your opinion about a week after you start deploying these things.
>
> Not to mention the faulty low temperature, low speed part mistakenly
> shipped in hundreds, if not thousands of units.
>
> SB, recall your mistakes and replace them.
>
>
>
>
>
>  On Thu, 3 Jul 2003, Earl Campbell wrote:
>
> >  I am going to weigh in on this. I think SB is the MOST responsive of
all
> > the vendors out there. I only have 4 APPO units at the moment but I am
> > getting ready to buy 100 more thanks to a federal grant! I have never
had a
> > problem with the APPO units, and I have run the gambit on trying other
units
> >  My system is small compared to others but with the $444,000 grant I am
> > gonna expand now. I have great faith in SB on price to performance
ratio.I
> > wouldn't consider a vendor with a high failure rate. There rate is ~1.5
%
> > which isn't bad. My system now has 4 APPO units (up to date firmware
always)
> > with about 30 D-Link DWL-900 AP's (the old ones) not +. I had a heck of
a
> > time getting my 20 mile link to work. I spent most of last summer trying
to
> > get it to work with D-Link equipment but no go. Then I got SB units and
they
> > worked and have worked flawlessly for a year now. Yes they are the older
> > units with 50 Ft. of cat cable and stock power injectors. The problem
turned
> > out to be a timing issue with the D-Link units. Anything over 10 miles
was
> > VERY intermittent. So, I talk with experience and believe in the SB
units.
> > So consider the response that SB gives, not trying to hide problems, and
> > they LISTEN to the customer. I wish other vendors would adopt the same
> > attitude as SB.
> > Earl - UpHi.net
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org 

Reply via email to