Get a battery pack with 8 cells in it - size AA or D - rechargable... or get a little 12v motorcycle battery. Should last longer than 10 min.
----- Original Message ----- From: "Blaine Fleming" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, July 04, 2003 1:48 PM Subject: RE: [smartBridges] airBridge indoor min & max operating voltage > I am looking at an extremely lightweight solution that I can bring with me > on a rooftop to get just 10 minutes of power from. I am also looking at > some installs in very unusual locations where power won't be anything > conventional. I can make these sources put out what is needed for the AB > with no problem. The length of the parts list will vary greatly depending > on the operational limits of the AB. > > I have crunched the numbers on voltage drop and figure the lowest operating > voltage to be about 5V but I would like some solid numbers. If I have to I > will crack open a unit and figure it out myself, but I would rather not. > > Please, no lectures on basics of electricity and electronics. > > --Blaine > > > At 07:40 AM 7/4/2003, you wrote: > > >Hehe im gonna go put 19.5 on just to check :P just kidding hehe hmmm I > >feel someone is trying an alternate power source and wants to make sure > >they will not freak out. > > > >Chris > > > >-----Original Message----- > >From: John Banes [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] > >Sent: Friday, July 04, 2003 9:24 AM > >To: [EMAIL PROTECTED] > > > >I think what is being asked is what is the lowest voltage the unit will > >function and what is the highest voltage the unit will take without burning > >up. > > > >The nominal rating you state would be the 350 mA at 12V DC. > > > >What is wanted are the limits, such as Minimum voltage 10.2V DC, Maximum > >voltage 19.5V DC, max ripple .5V > >(NOTE: THESE ARE EXAMPLES ONLY, NOT REAL SB NUMBERS) > > > >John > > > >----- Original Message ----- > >From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Friday, July 04, 2003 01:30 AM > >Subject: RE: [smartBridges] airBridge indoor min & max operating voltage > > > > > For airBridge indoor > > > > > > Power Consumption 350 mA at 12V DC > > > > > > I guess this is what you are looking for > > > > > > Regards, > > > > > > Vasu > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > > > [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] g] > > On Behalf Of Blaine Fleming > > > Sent: Friday, July 04, 2003 3:02 PM > > > To: '[EMAIL PROTECTED]' > > > Subject: RE: [smartBridges] airBridge indoor min & max operating voltage > > > > > > I'm aware of these numbers, but it didn't answer my question. What are > > > the > > > operating voltage specs for the radio hardware itself? > > > > > > --Blaine > > > > > > > > > At 10:40 AM 7/2/2003, you wrote: > > > >Please refer to this link > > > ><http://www.smartbridges.com/new/products/ps.php>http://www.smartbridge > > s.com/new/products/ps.php . Normally use of > > > Indoor > > > >airBridge is 12V and is sufficient. If the Ethernet cable length is 160 > > > >feet or longer, then use 18V (max). > > > > > > > >Alex > > > >sB Tech Support > > > > > > > > > > > > > > > > > > > >-----Original Message----- > > > >From: [EMAIL PROTECTED] > > > >[<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] > > 15.org] On Behalf Of Blaine Fleming > > > >Sent: Thursday, July 03, 2003 12:27 AM > > > >To: '[EMAIL PROTECTED]' > > > >Subject: [smartBridges] airBridge indoor min & max operating voltage > > > > > > > > > > > >What is the absolute minimum and maximum operating voltage for > > > airBridge > > > > > > > >indoor and outdoor units? I just looked at the site quickly and didn't > > > >find the specs. Any info would be appreciated. > > > > > > > >--Blaine > > > > > > > >The PART-15.ORG smartBridges Discussion List > > > >To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type subscribe > > > >smartBridges <yournickname> To Remove: > > <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > > >the body type unsubscribe smartBridges) > > > >Archives: <http://archives.part-15.org>http://archives.part-15.org > > > > > > > >The PART-15.ORG smartBridges Discussion List > > > >To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type subscribe > > > >smartBridges <yournickname> > > > >To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] > > (in the body type unsubscribe > > > >smartBridges) > > > >Archives: <http://archives.part-15.org>http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type subscribe > > > smartBridges <yournickname> > > > To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type unsubscribe > > > smartBridges) > > > Archives: <http://archives.part-15.org>http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type subscribe > >smartBridges <yournickname> > > > To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > > the body type unsubscribe > >smartBridges) > > > Archives: <http://archives.part-15.org>http://archives.part-15.org > > > > > > >The PART-15.ORG smartBridges Discussion List > >To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in the > >body type subscribe smartBridges <yournickname> > >To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in > >the body type unsubscribe smartBridges) > >Archives: <http://archives.part-15.org>http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
