Just got one at OfficeMax for $40.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Kevin Summers
Sent: Saturday, July 05, 2003 1:07 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] airBridge indoor min & max operating voltage



We've just thrown a 500VA power strip UPS into a backpack
and gone up on a roof with it. It powers the laptop if
needed and powers the radio. They can be found at CompUSA
or any office supply store for about $69-79.

Kevin Summers
KISTech Internet Services Inc.
www.kistech.com

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] Behalf Of Blaine Fleming
> Sent: Friday, July 04, 2003 11:48 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] airBridge indoor min & max operating 
> voltage
>
>
> I am looking at an extremely lightweight solution that I can bring 
> with me on a rooftop to get just 10 minutes of power from.  I am also 
> looking at some installs in very unusual locations where power won't 
> be anything conventional.  I can make these sources put out what is 
> needed for the AB with no problem.  The length of the parts list will 
> vary greatly depending
> on the operational limits of the AB.
>
> I have crunched the numbers on voltage drop and figure the lowest 
> operating voltage to be about 5V but I would like some solid numbers.  
> If I have to I
> will crack open a unit and figure it out myself, but I would rather not.
>
> Please, no lectures on basics of electricity and electronics.
>
> --Blaine
>
>
> At 07:40 AM 7/4/2003, you wrote:
>
> >Hehe im gonna go put 19.5 on just to check :P just kidding hehe hmmm 
> >I feel someone is trying an alternate power source and wants to make 
> >sure they will not freak out.
> >
> >Chris
> >
> >-----Original Message-----
> >From: John Banes [<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED]
> >Sent: Friday, July 04, 2003 9:24 AM
> >To: [EMAIL PROTECTED]
> >
> >I think what is being asked is what is the lowest voltage the unit 
> >will function and what is the highest voltage the unit will take
> without burning
> >up.
> >
> >The nominal rating  you state would be the 350 mA at 12V DC.
> >
> >What is wanted are the limits, such as Minimum voltage 10.2V DC, 
> >Maximum voltage 19.5V DC, max ripple .5V
> >(NOTE: THESE ARE EXAMPLES ONLY, NOT REAL SB NUMBERS)
> >
> >John
> >
> >----- Original Message -----
> >From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Friday, July 04, 2003 01:30 AM
> >Subject: RE: [smartBridges] airBridge indoor min & max operating 
> >voltage
> >
> > > For airBridge indoor
> > >
> > > Power Consumption 350 mA at 12V DC
> > >
> > > I guess this is what you are looking for
> > >
> > > Regards,
> > >
> > > Vasu
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > >
> >
> [<mailto:[EMAIL PROTECTED]>mailto:smartBridges-owner@
> part-15.org]
> > On Behalf Of Blaine Fleming
> > > Sent: Friday, July 04, 2003 3:02 PM
> > > To: '[EMAIL PROTECTED]'
> > > Subject: RE: [smartBridges] airBridge indoor min & max
> operating voltage
> > >
> > > I'm aware of these numbers, but it didn't answer my question.
>  What are
> > > the
> > > operating voltage specs for the radio hardware itself?
> > >
> > > --Blaine
> > >
> > >
> > > At 10:40 AM 7/2/2003, you wrote:
> > > >Please refer to this link
> > >
> ><http://www.smartbridges.com/new/products/ps.php>http://www.smartbrid
> >ge
> > s.com/new/products/ps.php . Normally use of
> > > Indoor
> > > >airBridge is 12V and is sufficient. If the Ethernet cable
> length is 160
> > > >feet or longer, then use 18V (max).
> > > >
> > > >Alex
> > > >sB Tech Support
> > > >
> > > >
> > > >
> > > >
> > > >-----Original Message-----
> > > >From: [EMAIL PROTECTED]
> > >
> >[<mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED]
> >t-
> > 15.org] On Behalf Of Blaine Fleming
> > > >Sent: Thursday, July 03, 2003 12:27 AM
> > > >To: '[EMAIL PROTECTED]'
> > > >Subject: [smartBridges] airBridge indoor min & max operating 
> > > >voltage
> > > >
> > > >
> > > >What is the absolute minimum and maximum operating voltage for
> > > airBridge
> > > >
> > > >indoor and outdoor units?  I just looked at the site quickly
> and didn't
> > > >find the specs.  Any info would be appreciated.
> > > >
> > > >--Blaine
> > > >
> > > >The PART-15.ORG smartBridges Discussion List
> > > >To Join:
> <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in
> > the body type subscribe
> > > >smartBridges <yournickname> To Remove:
> > <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in
> > > >the body type unsubscribe smartBridges)
> > > >Archives: 
> > > ><http://archives.part-15.org>http://archives.part-15.org
> > > >
> > > >The PART-15.ORG smartBridges Discussion List
> > > >To Join:
> <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in
> > the body type subscribe
> > > >smartBridges <yournickname>
> > > >To Remove: 
> > > ><mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED]
> > (in the body type unsubscribe
> > > >smartBridges)
> > > >Archives: 
> > > ><http://archives.part-15.org>http://archives.part-15.org
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] 
> > > (in
> > the body type subscribe
> > > smartBridges <yournickname>
> > > To Remove:
> <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in
> > the body type unsubscribe
> > > smartBridges)
> > > Archives: <http://archives.part-15.org>http://archives.part-15.org
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] 
> > > (in
> > the body type subscribe
> >smartBridges <yournickname>
> > > To Remove:
> <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in
> > the body type unsubscribe
> >smartBridges)
> > > Archives: <http://archives.part-15.org>http://archives.part-15.org
> > >
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join:
> <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in the
> >body type subscribe smartBridges <yournickname>
> >To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] 
> >(in the body type unsubscribe smartBridges)
> >Archives: <http://archives.part-15.org>http://archives.part-15.org
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe 
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in 
> the body type unsubscribe smartBridges)
> Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to