The thing is it was working fine in Win 2K Pro.

----- Original Message ----- 
From: "Lewis Watson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 08, 2003 12:20 PM
Subject: Re: [smartBridges] Windows XP Pro and AirCarte


> Nish, I have done this like 1000 times :-)
> Lewis
>
>
> ----- Original Message ----- 
> From: "Nish Park" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, July 08, 2003 12:05 PM
> Subject: RE: [smartBridges] Windows XP Pro and AirCarte
>
>
> > Try this.
> >
> > Double click on the Tray Icon to open it. Do a re-scan on the site
> > survey. Most likely even before it finishes the site survey, the Tray
> > Icon will turn green.
> >
> > Nish
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Lewis Watson
> > Sent: Tuesday, July 08, 2003 7:16 PM
> > To: '[EMAIL PROTECTED]'
> > Subject: Re: [smartBridges] Windows XP Pro and AirCarte
> >
> > Seeni,
> > This had the exact same result. The funny thing is if you mouse over
the
> > monitor icon
> > in the system tray it shows signal strength at 68% but yet there is a
> > big
> > red over it. What do we need to do to get this working in XP.
> >
> > Like someone else mentioned (not a SmartBridges representative),  the
> > bigger issue may be a change within Windows XP but I seriously doubt
> > that
> > M-soft will change their code to accommodate SmartBridges :-) and I am
> > certainly an advocate for other OS options (75% of my servers run
> > FreeBSD). So rather than saying "it's a windows issue" I need sBridges
> > to
> > please resolve this issue.
> >
> > Is there anything else to try?
> > Lewis
> >
> >
> > ----- Original Message ----- 
> > From: "Seeni" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Sunday, July 06, 2003 9:41 PM
> > Subject: RE: [smartBridges] Windows XP Pro and AirCarte
> >
> >
> > >
> > >
> > > Please try to uninstall the airMonitor and reboot your PC, try
again.
> > If
> > > uninstall doesn't help, please follow the below guidelines.
> > >
> > > Using Task Manager, select processes TAB and kill "WLM.EXE" file.
> > >
> > > browse c:\windows\system32 and delete "Pcandis5.sys" and
"W32N50.DLL"
> > >
> > > Reboot your PC.
> > >
> > > Then remove the aircarte from the slot, start installing the
software
> > > and it will prompt you to insert the aircarte. Please follow the
> > > instructions and accept the default options.
> > >
> > > Also in order to use our airMonitor utility, you have to uncheck
"Use
> > > Windows to configure" options in the wireless network connection -
> > > properties.
> > >
> > >
> > >
> > > Please try it and let us know the status.
> > >
> > >
> > >
> > > Thanks
> > >
> > >
> > >
> > > Seeni, SB support
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Gojkovich
> > > Sent: Monday, July 07, 2003 10:15 AM
> > > To: '[EMAIL PROTECTED]'
> > > Subject: RE: [smartBridges] Windows XP Pro and AirCarte
> > >
> > >
> > >
> > > These has to be a Windows issue because we have some Roamabout cards
> > > that do the exact same thing.  This has been going on since windows
XP
> > > was released and I have yet to find a resolution.
> > >
> > > --
> > > Jeff
> > >
> > > > I have latest drivers and firmware under 2k and I have noticed
this
> > as
> > > > well
> > > > it works perfectly I mean I don't notice any problems I can push
> > > 600+k/sec
> > > > on dl's over the card constant, but I notice that 100/100 links
will
> > > flash
> > > > X
> > > > every so often for no apparent reason and then come back doesn't
> > delay
> > > > service I think but its kinda dumb.
> > > >
> > > > SB can we expect a Aircarte with antenna jack? Maybe 200mw like
the
> > > senao
> > > > :)
> > > >
> > > > Chris
> > > >
> > > > -----Original Message-----
> > > > From: Lewis Watson [mailto:[EMAIL PROTECTED]
> > > > Sent: Sunday, July 06, 2003 8:19 PM
> > > > To: [EMAIL PROTECTED]
> > > >
> > > > Tried this suggestion and still not good. Any other ideas? This is
> > not
> > > > good at all. The card worked fine for 4 months with Windows 2K
pro.
> > > Now
> > > > it's unreliable to the point of useless with XP Pro. Does anyone
> > know
> > > of
> > > > any solution, short of going back to another version of Windows?
> > > > Thanks.
> > > > Lewis
> > > >
> > > > ----- Original Message -----
> > > > From: "Shawn Mitchell"
> > > > To:
> > > > Sent: Sunday, July 06, 2003 9:57 AM
> > > > Subject: RE: [smartBridges] Windows XP Pro and AirCarte
> > > >
> > > >
> > > >> Make sure the "zero wireless network config" service or something
> > is
> > > > stopped
> > > >> and disabled... That service likes to take everything over....
> > > >>
> > > >> but if you tried to config your card and then shut down the
> > service..
> > > >> chances are you've locked up some of your subsystem. so you'll
have
> > > to
> > > >> probably reboot...
> > > >>
> > > >> -----Original Message-----
> > > >> From: [EMAIL PROTECTED]
> > > >> [mailto:[EMAIL PROTECTED] Behalf Of Lewis Watson
> > > >> Sent: Sunday, July 06, 2003 9:31
> > > >> To: [EMAIL PROTECTED]
> > > >> Subject: [smartBridges] Windows XP Pro and AirCarte
> > > >>
> > > >>
> > > >> I know this has been asked before but at this time the archives
are
> > > > down.
> > > >> I have just upgraded to Windows XP and now my aircarte is
> > completely
> > > >> unreliable. I have removed the check from "allow windows to
manage
> > > >> wireless connections and I have tried 1.3 and 1.2 software. It
will
> > > show
> > > > a
> > > >> connection of excellent and a second later "no connection". Is
> > there
> > > a
> > > > fix
> > > >> for this?
> > > >> This card was working fine while I had win2k installed but
> > apparantly
> > > >> there are issues with XP pro and sB Aircarte.
> > > >> Thanks!
> > > >> Lewis
> > > >>
> > > >> The PART-15.ORG smartBridges Discussion List
> > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > > >> smartBridges
> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > unsubscribe
> > > >> smartBridges)
> > > >> Archives: http://archives.part-15.org
> > > >>
> > > >> The PART-15.ORG smartBridges Discussion List
> > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > > > smartBridges
> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > unsubscribe
> > > > smartBridges)
> > > >> Archives: http://archives.part-15.org
> > > >>
> > > >
> > > > The PART-15.ORG smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > > > smartBridges
> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> > > > smartBridges)
> > > > Archives: http://archives.part-15.org
> > > >
> > > The PART-15.ORG smartBridges Discussion List To Join:
> > > mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
> > To
> > > Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > > smartBridges) Archives: http://archives.part-15.org
> > >
> > >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > smartBridges)
> > Archives: http://archives.part-15.org
> >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> > Archives: http://archives.part-15.org
> >
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to