I've been trying to figure out why I can't log into my smartbridges devices from over the Internet. Let's take the aPPO as an example. It has a public IP addresses, correct default gateway and subnet mask, I can ping it fine, Configuration port is set to both wired and wireless, Primary port is set to ethernet side.
Network looks like this Me.... Internet.....T1router....crossover cable....FreeBSD server configured as bridge.....switch.....APPO... wireless....airBridges I can't log into the APPO or any of the airBridges. Another thing I noticed that might be relevant... when I disable client to client communications in the APPO, I understood it would make it pass the data bound for other clients on the LAN back through the FreeBSD server to the T1 router, which would then direct the traffic back onto the local network and back out of the APPO. This doesn't work. Clients can not see each other when set up like this. Does anyone have any idea what might be wrong with my setup? The T1 router is a managed router by ACC. I have a feeling the problem may be with my freeBSD bridge. But what, because it passes normal traffic just fine. It's there primarily for running dummynet and bandwidth throttling. Any tips? Thanks, Roger The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
