Sounds to me like the unit is on a different IP (subnet) than the computer?
Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Laurence Laforga Sent: Thursday, July 24, 2003 11:16 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? I can't even view this ABTotal through the ethernet side. Initially we thought that it was due to the firmware because it lost association after about 30 minutes and so we asked the customer to turn it off completely while we await for the firmware update (2 weeks ago). Now when we tried to apply the new firmware, I couldn't see in on simplemonitor via wireless side so we went out to the customer and tried the ethernet side and still no luck. Went outside and all three lights on except that blue light still blinking. Took it down and brought it back and then could see it on the ethernet side so we upgraded the firmware....now, absolutely nothing...can't ping the unit, can't see is it on simplemonitor.....stayed up all night trying to figure it out....customer called this morning and wants a refund of her installation and 1st month service. What could be wrong? Send it back for RMA? LL > > --------------Boundary-00=_B5QGQL80000000000000 > Content-Type: Multipart/Alternative; > boundary="------------Boundary-00=_B5QGLVC0000000000000" > > > --------------Boundary-00=_B5QGLVC0000000000000 > Content-Type: Text/Plain; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable > > Sully,=0D > I get this too if I am more than a couple of hops away from unit. (such as= > 1 > or 2 repeaters in the line.)=0D > Earl UpHi.net =0D > =0D > -------Original Message-------=0D > =0D > From: [EMAIL PROTECTED] > Date: Thursday, July 24, 2003 01:05:06 PM=0D > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units??=0D > =0D > Wow...this has me really stumped.=0D > =0D > If I get the client to do a "restore to factory default", then I can log=0D > right in.=0D > =0D > If I wirelessly use simpleDeploy on the airPoints (airBridges down allow=0D > this), then I can log right into the units.=0D > =0D > Otherwise, I can not log in. I get this error message "Can not Read the=0D > airBridge Configuration...Check your password."=0D > =0D > Please...does anyone have a clue on what could be causing this??=0D > =0D > Sully=0D > =0D > -----Original Message-----=0D > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > Network=0D > Sent: Saturday, July 19, 2003 11:20 PM=0D > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units??=0D > =0D > BTW...I did not upgrade any of these units to the new BETA firmware.=0D > So...it's not that either.=0D > =0D > As a matter of fact, I haven't done anything to these units. I bet that=0D > a manual "restore to factory default" by the client would allow me to=0D > log in again. But....being that the units are working still, I really=0D > don't want to bother the client.=0D > =0D > Sully=0D > =0D > -----Original Message-----=0D > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > Network=0D > Sent: Saturday, July 19, 2003 11:11 PM=0D > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units??=0D > =0D > MORE INFO:=0D > Rebooting the devices with simpleNMS does NOT work. I still can not log=0D > into 75% of my units (aP, aPPo, aB, aBO).=0D > =0D > I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and aP's=0D > are the only ones I can still wirelessly use simpeDeploy on). Once I=0D > reflashed them with simpleDeploy, I was able to log in as normal with=0D > simpleMonitor.=0D > =0D > 1. simpleDeploy uses the ADMIN password. So...obviously, I know my=0D > passwords. So...please don't suggest bad password.=0D > =0D > 2. I have simpleNMS loaded with my ADMIN passwords as well, and I am=0D > able to see stats and perform reboots. Once again proving that I know=0D > all my passwords.=0D > =0D > 3. MRTG is polling the units every 5 minutes with the USER passwords.=0D > One last time proving that I know my passwords.=0D > =0D > So....why am I all of a sudden unable to log into 75% of my units (very=0D > old and very new units)?!?!?!=0D > =0D > Why does reflashing them with simpleDeploy fix the problem???=0D > =0D > About 30 of my units are aB or aBo's, so I cant use simpleDeploy to fix=0D > the problem.=0D > =0D > Anyone have any suggestions???=0D > =0D > Sully=0D > =0D > =0D > =0D > =0D > =0D > -----Original Message-----=0D > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > Network=0D > Sent: Saturday, July 19, 2003 9:58 PM=0D > To: [EMAIL PROTECTED] > Subject: [smartBridges] Cant log into units??=0D > =0D > For some odd reason, I can not log into a lot of my units using=0D > simpleMonitor. I have tried both the admin and user passwords as well.=0D > =0D > To add to the oddness, simpleNMS is able to talk with all the units=0D > (obtaining their stats, etc). But when I choose MANAGE (which opens=0D > simpleMonitor--also using my ADMIN password), I get the "Can not=0D > read...check your password" crap.=0D > =0D > Same thing happens when I try to open it with simpleMonitor directly.=0D > =0D > More oddness....MRTG is polling the units just fine, obtaining their=0D > usage, RSSI and LQ...using the USER password.=0D > =0D > I am stumped. I don't know when this started...cause I don't normally=0D > log into the units unless there is a problem. I had one that wouldn't=0D > let me in today, so I tried all of them.=0D > =0D > To recap...I can not log into over half of my units (about 35 of the 45)=0D > using either the ADMIN or USER password=0D > =0D > What the heck I am doing wrong....duh....am I forgetting something=0D > really stupid???=0D > =0D > Sully=0D > =0D > =0D > The PART-15.ORG smartBridges Discussion List=0D > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > smartBridges <yournickname>=0D > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe=0D > smartBridges)=0D > Archives: http://archives.part-15.org=0D > =0D > The PART-15.ORG smartBridges Discussion List=0D > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > smartBridges <yournickname>=0D > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe=0D > smartBridges)=0D > Archives: http://archives.part-15.org=0D > =0D > The PART-15.ORG smartBridges Discussion List=0D > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > smartBridges <yournickname>=0D > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe=0D > smartBridges)=0D > Archives: http://archives.part-15.org=0D > =0D > The PART-15.ORG smartBridges Discussion List=0D > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname>=0D > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges)=0D > Archives: http://archives.part-15.org=0D > =2E > --------------Boundary-00=_B5QGLVC0000000000000 > Content-Type: Text/HTML; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable > > <HTML><HEAD> > <META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso- 8859-= > 1"> > <META content=3D"IncrediMail 1.0" name=3DGENERATOR> > <!--IncrdiXMLRemarkStart> > <IncrdiX-Info> > <X-FID>FLAVOR00-NONE-0000-0000-000000000000</X-FID> > <X-FVER></X-FVER> > <X-CNT>;</X-CNT> > </IncrdiX-Info> > <IncrdiXMLRemarkEnd--> > </HEAD> > <BODY style=3D"BACKGROUND-POSITION: 0px 0px; FONT-SIZE: 12pt; MARGIN: 5px= > 10px 10px; FONT-FAMILY: Arial" bgColor=3D#ffffff background=3D"" scroll=3D= > yes ORGYPOS=3D"0" X-FVER=3D"3.0"> > <TABLE id=3DINCREDIMAINTABLE cellSpacing=3D0 cellPadding=3D2 width=3D"100= > %" border=3D0> > <TBODY> > <TR> > <TD id=3DINCREDITEXTREGION style=3D"FONT-SIZE: 12pt; CURSOR: auto; FONT-F= > AMILY: Arial" width=3D"100%"> > <DIV>Sully,</DIV> > <DIV>I get this too if I am more than a couple of hops away from unit.(su= > ch as 1 or 2 repeaters in the line.)</DIV> > <DIV>Earl UpHi.net </DIV> > <DIV> </DIV> > <DIV id=3DIncrediOriginalMessage><I>-------Original Message------- </I></D= > IV> > <DIV> </DIV> > <DIV id=3Dreceivestrings> > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>From:</B></I> <A href=3D"m= > ailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A></DIV> > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>Date:</B></I> Thursday, Ju= > ly 24, 2003 01:05:06 PM</DIV> > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>To:</B></I> <A href=3D"mai= > lto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A></DIV> > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>Subject:</B></I> RE: [smar= > tBridges] Cant log into units??</DIV></DIV> > <DIV> </DIV> > <DIV>Wow...this has me really stumped.</DIV> > <DIV> </DIV> > <DIV>If I get the client to do a "restore to factory default", then I can= > log</DIV> > <DIV>right in.</DIV> > <DIV> </DIV> > <DIV>If I wirelessly use simpleDeploy on the airPoints (airBridges down a= > llow</DIV> > <DIV>this), then I can log right into the units.</DIV> > <DIV> </DIV> > <DIV>Otherwise, I can not log in. I get this error message "Can not Read = > the</DIV> > <DIV>airBridge Configuration...Check your password."</DIV> > <DIV> </DIV> > <DIV>Please...does anyone have a clue on what could be causing this?? </DI= > V> > <DIV> </DIV> > <DIV>Sully</DIV> > <DIV> </DIV> > <DIV>-----Original Message-----</DIV> > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">smartBridges= > [EMAIL PROTECTED]</A></DIV> > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:smartBridg= > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > <DIV>Network</DIV> > <DIV>Sent: Saturday, July 19, 2003 11:20 PM</DIV> > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">[EMAIL PROTECTED] > =2Eorg</A></DIV> > <DIV>Subject: RE: [smartBridges] Cant log into units??</DIV> > <DIV> </DIV> > <DIV>BTW...I did not upgrade any of these units to the new BETA firmware.= > </DIV> > <DIV>So...it's not that either.</DIV> > <DIV> </DIV> > <DIV>As a matter of fact, I haven't done anything to these units. I bet t= > hat</DIV> > <DIV>a manual "restore to factory default" by the client would allow me t= > o</DIV> > <DIV>log in again. But....being that the units are working still, I reall= > y</DIV> > <DIV>don't want to bother the client.</DIV> > <DIV> </DIV> > <DIV>Sully</DIV> > <DIV> </DIV> > <DIV>-----Original Message-----</DIV> > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">smartBridges= > [EMAIL PROTECTED]</A></DIV> > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:smartBridg= > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > <DIV>Network</DIV> > <DIV>Sent: Saturday, July 19, 2003 11:11 PM</DIV> > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">[EMAIL PROTECTED] > =2Eorg</A></DIV> > <DIV>Subject: RE: [smartBridges] Cant log into units??</DIV> > <DIV> </DIV> > <DIV>MORE INFO:</DIV> > <DIV>Rebooting the devices with simpleNMS does NOT work. I still can not = > log</DIV> > <DIV>into 75% of my units (aP, aPPo, aB, aBO).</DIV> > <DIV> </DIV> > <DIV>I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and a= > P's</DIV> > <DIV>are the only ones I can still wirelessly use simpeDeploy on). Once I= > </DIV> > <DIV>reflashed them with simpleDeploy, I was able to log in as normal wit= > h</DIV> > <DIV>simpleMonitor.</DIV> > <DIV> </DIV> > <DIV>1. simpleDeploy uses the ADMIN password. So...obviously, I know my</= > DIV> > <DIV>passwords. So...please don't suggest bad password.</DIV> > <DIV> </DIV> > <DIV>2. I have simpleNMS loaded with my ADMIN passwords as well, and I am= > </DIV> > <DIV>able to see stats and perform reboots. Once again proving that I kno= > w</DIV> > <DIV>all my passwords.</DIV> > <DIV> </DIV> > <DIV>3. MRTG is polling the units every 5 minutes with the USER passwords= > =2E</DIV> > <DIV>One last time proving that I know my passwords.</DIV> > <DIV> </DIV> > <DIV>So....why am I all of a sudden unable to log into 75% of my units (v= > ery</DIV> > <DIV>old and very new units)?!?!?!</DIV> > <DIV> </DIV> > <DIV>Why does reflashing them with simpleDeploy fix the problem??? </DIV> > <DIV> </DIV> > <DIV>About 30 of my units are aB or aBo's, so I cant use simpleDeploy to = > fix</DIV> > <DIV>the problem.</DIV> > <DIV> </DIV> > <DIV>Anyone have any suggestions???</DIV> > <DIV> </DIV> > <DIV>Sully</DIV> > <DIV> </DIV> > <DIV> </DIV> > <DIV> </DIV> > <DIV> </DIV> > <DIV> </DIV> > <DIV>-----Original Message-----</DIV> > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">smartBridges= > [EMAIL PROTECTED]</A></DIV> > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:smartBridg= > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > <DIV>Network</DIV> > <DIV>Sent: Saturday, July 19, 2003 9:58 PM</DIV> > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">[EMAIL PROTECTED] > =2Eorg</A></DIV> > <DIV>Subject: [smartBridges] Cant log into units??</DIV> > <DIV> </DIV> > <DIV>For some odd reason, I can not log into a lot of my units using</DIV= > > > <DIV>simpleMonitor. I have tried both the admin and user passwords as wel= > l.</DIV> > <DIV> </DIV> > <DIV>To add to the oddness, simpleNMS is able to talk with all the units<= > /DIV> > <DIV>(obtaining their stats, etc). But when I choose MANAGE (which opens<= > /DIV> > <DIV>simpleMonitor--also using my ADMIN password), I get the "Can not</DI= > V> > <DIV>read...check your password" crap.</DIV> > <DIV> </DIV> > <DIV>Same thing happens when I try to open it with simpleMonitor directly= > =2E</DIV> > <DIV> </DIV> > <DIV>More oddness....MRTG is polling the units just fine, obtaining their= > </DIV> > <DIV>usage, RSSI and LQ...using the USER password.</DIV> > <DIV> </DIV> > <DIV>I am stumped. I don't know when this started...cause I don't normall= > y</DIV> > <DIV>log into the units unless there is a problem. I had one that wouldn'= > t</DIV> > <DIV>let me in today, so I tried all of them.</DIV> > <DIV> </DIV> > <DIV>To recap...I can not log into over half of my units (about 35 of the= > 45)</DIV> > <DIV>using either the ADMIN or USER password</DIV> > <DIV> </DIV> > <DIV>What the heck I am doing wrong....duh....am I forgetting something</= > DIV> > <DIV>really stupid???</DIV> > <DIV> </DIV> > <DIV>Sully</DIV> > <DIV> </DIV> > <DIV> </DIV> > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > t-15.org</A> (in the body type subscribe</DIV> > <DIV>smartBridges <yournickname></DIV> > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > art-15.org</A> (in the body type unsubscribe</DIV> > <DIV>smartBridges)</DIV> > <DIV>Archives: <A href=3D"http://archives.part- 15.org">http://archives.pa= > rt-15.org</A></DIV> > <DIV> </DIV> > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > t-15.org</A> (in the body type subscribe</DIV> > <DIV>smartBridges <yournickname></DIV> > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > art-15.org</A> (in the body type unsubscribe</DIV> > <DIV>smartBridges)</DIV> > <DIV>Archives: <A href=3D"http://archives.part- 15.org">http://archives.pa= > rt-15.org</A></DIV> > <DIV> </DIV> > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > t-15.org</A> (in the body type subscribe</DIV> > <DIV>smartBridges <yournickname></DIV> > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > art-15.org</A> (in the body type unsubscribe</DIV> > <DIV>smartBridges)</DIV> > <DIV>Archives: <A href=3D"http://archives.part- 15.org">http://archives.pa= > rt-15.org</A></DIV> > <DIV> </DIV> > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > t-15.org</A> (in the body type subscribe smartBridges <yournickname>= > ;</DIV> > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] 15.org">mailto:[EMAIL PROTECTED] > art-15.org</A> (in the body type unsubscribe smartBridges)</DIV> > <DIV>Archives: <A href=3D"http://archives.part- 15.org">http://archives.pa= > rt-15.org</A></DIV> > <DIV>.</DIV></TD></TR> > <TR> > <TD id=3DINCREDIFOOTER width=3D"100%"> > <TABLE cellSpacing=3D0 cellPadding=3D0 width=3D"100%"> > <TBODY> > <TR> > <TD width=3D"100%"></TD> > <TD id=3DINCREDISOUND vAlign=3Dbottom align=3Dmiddle></TD> > <TD id=3DINCREDIANIM vAlign=3Dbottom align=3Dmiddle></TD></TR></TBODY></T= > ABLE></TD></TR></TBODY></TABLE><SPAN id=3DIncrediStamp><SPAN dir=3Dltr><F= > ONT face=3D"Arial, Helvetica, sans-serif" size=3D2>______________________= > ______________________________<BR><FONT face=3D"Comic Sans MS" size=3D2><= > A href=3D"http://www.incredimail.com/redir.asp? ad_id=3D309&lang=3D9">= > <IMG alt=3D"" hspace=3D0 src=3D"cid:B3158432-043F-4B3D-8547- 58FEDE5308B5"= > align=3Dbaseline border=3D0></A> <I>IncrediMail</I> - <B>Email has= > finally evolved</B> - </FONT><A href=3D"http://www.incredimail.com/redir= > =2Easp?ad_id=3D309&lang=3D9"><FONT face=3D"Times New Roman" size=3D3>= > <B><U>Click Here</U></B></FONT></A></SPAN></SPAN></FONT></BODY></HTML> > --------------Boundary-00=_B5QGLVC0000000000000-- > > --------------Boundary-00=_B5QGQL80000000000000 > Content-Type: image/gif; > name="IMSTP.gif" > Content-Transfer-Encoding: base64 > Content-ID: <B3158432-043F-4B3D-8547-58FEDE5308B5> > > R0lGODlhFAAPALMIAP9gAM9gAM8vAM9gL/+QL5AvAGAvAP9gL////wAAAAAAAAAAAAAAAAA AAAAA > AAAAACH/C05FVFNDQVBFMi4wAwEAAAAh+QQJFAAIACwAAAAAFAAPAAAEVRDJSaudJuudrxl EKI6B > URlCUYyjKpgYAKSgOBSCDEuGDKgrAtC3Q/R+hkPJEDgYCjpKr5A8WK9OaPFZwHoPqm3366V KyeRt > E30tVVRscMHDqV/u+AgAIfkEBWQACAAsAAAAABQADwAABBIQyUmrvTjrzbv/YCiOZGmeaAQ AIfkE > CRQACAAsAgABABAADQAABEoQIUOrpXIOwrsPxiQUheeRAgUA49YNhbCqK1kS9grQhXGAhsD BUJgZ > AL2Dcqkk7ogFpvRAokSn0p4PO6UIuUsQggSmFjKXdAgRAQAh+QQFCgAIACwAAAAAFAAPAAA EEhDJ > Sau9OOvNu/9gKI5kaZ5oBAAh+QQJFAAIACwCAAEAEAANAAAEShAhQ6ulcg7Cuw/GJBSF55E CBQDj > 1g2FsKorWRL2CtCFcYCGwMFQmBkAvYNyqSTuiAWm9ECiRKfSng87pQi5SxCCBKYWMpd0CBE BACH5 > BAVkAAgALAAAAAAUAA8AAAQSEMlJq7046827/2AojmRpnmgEADs= > > --------------Boundary-00=_B5QGQL80000000000000-- > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > Laurence Laforga TIRGON Communications, LLC. dba Waipahu.Net Wireless Broadband The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
