Yeah it's the new radio with the short pigtail...tried different cat5 cables and powershot. Hopefully the advance replacement unit will be from the GOOD batch.
> Sounds like a bad cat5 connector on the end or the powershot. Try using a > different powershot and then replace the cat5 end. If it is a new radio with > short pigtail you may not be able to do this. I have not used the new ones > yet. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 15.org] > On Behalf Of Laurence Laforga > Sent: Thursday, July 24, 2003 2:16 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units?? > > > I can't even view this ABTotal through the ethernet side. Initially we > thought that it was due to the firmware because it lost association > after about 30 minutes and so we asked the customer to turn it off > completely while we await for the firmware update (2 weeks ago). Now > when we tried to apply the new firmware, I couldn't see in on > simplemonitor via wireless side so we went out to the customer and > tried the ethernet side and still no luck. Went outside and all three > lights on except that blue light still blinking. Took it down and > brought it back and then could see it on the ethernet side so we > upgraded the firmware....now, absolutely nothing...can't ping the > unit, can't see is it on simplemonitor.....stayed up all night trying > to figure it out....customer called this morning and wants a refund of > her installation and 1st month service. What could be wrong? Send it > back for RMA? > > LL > > > > > > --------------Boundary-00=_B5QGQL80000000000000 > > Content-Type: Multipart/Alternative; > > boundary="------------Boundary-00=_B5QGLVC0000000000000" > > > > > > --------------Boundary-00=_B5QGLVC0000000000000 > > Content-Type: Text/Plain; > > charset="iso-8859-1" > > Content-Transfer-Encoding: quoted-printable > > > > Sully,=0D > > I get this too if I am more than a couple of hops away from unit. > (such as= > > 1 > > or 2 repeaters in the line.)=0D > > Earl UpHi.net =0D > > =0D > > -------Original Message-------=0D > > =0D > > From: [EMAIL PROTECTED] > > Date: Thursday, July 24, 2003 01:05:06 PM=0D > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Cant log into units??=0D > > =0D > > Wow...this has me really stumped.=0D > > =0D > > If I get the client to do a "restore to factory default", then I can > log=0D > > right in.=0D > > =0D > > If I wirelessly use simpleDeploy on the airPoints (airBridges down > allow=0D > > this), then I can log right into the units.=0D > > =0D > > Otherwise, I can not log in. I get this error message "Can not Read > the=0D > > airBridge Configuration...Check your password."=0D > > =0D > > Please...does anyone have a clue on what could be causing this??=0D > > =0D > > Sully=0D > > =0D > > -----Original Message-----=0D > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > > Network=0D > > Sent: Saturday, July 19, 2003 11:20 PM=0D > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Cant log into units??=0D > > =0D > > BTW...I did not upgrade any of these units to the new BETA > firmware.=0D > > So...it's not that either.=0D > > =0D > > As a matter of fact, I haven't done anything to these units. I bet > that=0D > > a manual "restore to factory default" by the client would allow me > to=0D > > log in again. But....being that the units are working still, I > really=0D > > don't want to bother the client.=0D > > =0D > > Sully=0D > > =0D > > -----Original Message-----=0D > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > > Network=0D > > Sent: Saturday, July 19, 2003 11:11 PM=0D > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Cant log into units??=0D > > =0D > > MORE INFO:=0D > > Rebooting the devices with simpleNMS does NOT work. I still can not > log=0D > > into 75% of my units (aP, aPPo, aB, aBO).=0D > > =0D > > I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and > aP's=0D > > are the only ones I can still wirelessly use simpeDeploy on). Once > I=0D > > reflashed them with simpleDeploy, I was able to log in as normal > with=0D > > simpleMonitor.=0D > > =0D > > 1. simpleDeploy uses the ADMIN password. So...obviously, I know my=0D > > passwords. So...please don't suggest bad password.=0D > > =0D > > 2. I have simpleNMS loaded with my ADMIN passwords as well, and I > am=0D > > able to see stats and perform reboots. Once again proving that I > know=0D > > all my passwords.=0D > > =0D > > 3. MRTG is polling the units every 5 minutes with the USER > passwords.=0D > > One last time proving that I know my passwords.=0D > > =0D > > So....why am I all of a sudden unable to log into 75% of my units > (very=0D > > old and very new units)?!?!?!=0D > > =0D > > Why does reflashing them with simpleDeploy fix the problem???=0D > > =0D > > About 30 of my units are aB or aBo's, so I cant use simpleDeploy to > fix=0D > > the problem.=0D > > =0D > > Anyone have any suggestions???=0D > > =0D > > Sully=0D > > =0D > > =0D > > =0D > > =0D > > =0D > > -----Original Message-----=0D > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree=0D > > Network=0D > > Sent: Saturday, July 19, 2003 9:58 PM=0D > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] Cant log into units??=0D > > =0D > > For some odd reason, I can not log into a lot of my units using=0D > > simpleMonitor. I have tried both the admin and user passwords as > well.=0D > > =0D > > To add to the oddness, simpleNMS is able to talk with all the > units=0D > > (obtaining their stats, etc). But when I choose MANAGE (which > opens=0D > > simpleMonitor--also using my ADMIN password), I get the "Can not=0D > > read...check your password" crap.=0D > > =0D > > Same thing happens when I try to open it with simpleMonitor > directly.=0D > > =0D > > More oddness....MRTG is polling the units just fine, obtaining > their=0D > > usage, RSSI and LQ...using the USER password.=0D > > =0D > > I am stumped. I don't know when this started...cause I don't > normally=0D > > log into the units unless there is a problem. I had one that > wouldn't=0D > > let me in today, so I tried all of them.=0D > > =0D > > To recap...I can not log into over half of my units (about 35 of the > 45)=0D > > using either the ADMIN or USER password=0D > > =0D > > What the heck I am doing wrong....duh....am I forgetting something=0D > > really stupid???=0D > > =0D > > Sully=0D > > =0D > > =0D > > The PART-15.ORG smartBridges Discussion List=0D > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > > smartBridges <yournickname>=0D > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe=0D > > smartBridges)=0D > > Archives: http://archives.part-15.org=0D > > =0D > > The PART-15.ORG smartBridges Discussion List=0D > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > > smartBridges <yournickname>=0D > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe=0D > > smartBridges)=0D > > Archives: http://archives.part-15.org=0D > > =0D > > The PART-15.ORG smartBridges Discussion List=0D > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe=0D > > smartBridges <yournickname>=0D > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe=0D > > smartBridges)=0D > > Archives: http://archives.part-15.org=0D > > =0D > > The PART-15.ORG smartBridges Discussion List=0D > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname>=0D > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges)=0D > > Archives: http://archives.part-15.org=0D > > =2E > > --------------Boundary-00=_B5QGLVC0000000000000 > > Content-Type: Text/HTML; > > charset="iso-8859-1" > > Content-Transfer-Encoding: quoted-printable > > > > <HTML><HEAD> > > <META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso- > 8859-= > > 1"> > > <META content=3D"IncrediMail 1.0" name=3DGENERATOR> > > <!--IncrdiXMLRemarkStart> > > <IncrdiX-Info> > > <X-FID>FLAVOR00-NONE-0000-0000-000000000000</X-FID> > > <X-FVER></X-FVER> > > <X-CNT>;</X-CNT> > > </IncrdiX-Info> > > <IncrdiXMLRemarkEnd--> > > </HEAD> > > <BODY style=3D"BACKGROUND-POSITION: 0px 0px; FONT-SIZE: 12pt; > MARGIN: 5px= > > 10px 10px; FONT-FAMILY: Arial" bgColor=3D#ffffff background=3D"" > scroll=3D= > > yes ORGYPOS=3D"0" X-FVER=3D"3.0"> > > <TABLE id=3DINCREDIMAINTABLE cellSpacing=3D0 cellPadding=3D2 > width=3D"100= > > %" border=3D0> > > <TBODY> > > <TR> > > <TD id=3DINCREDITEXTREGION style=3D"FONT-SIZE: 12pt; CURSOR: auto; > FONT-F= > > AMILY: Arial" width=3D"100%"> > > <DIV>Sully,</DIV> > > <DIV>I get this too if I am more than a couple of hops away from > unit.(su= > > ch as 1 or 2 repeaters in the line.)</DIV> > > <DIV>Earl UpHi.net </DIV> > > <DIV> </DIV> > > <DIV id=3DIncrediOriginalMessage><I>-------Original Message------- > </I></D= > > IV> > > <DIV> </DIV> > > <DIV id=3Dreceivestrings> > > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>From:</B></I> <A > href=3D"m= > > ailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A></DIV> > > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>Date:</B></I> > Thursday, Ju= > > ly 24, 2003 01:05:06 PM</DIV> > > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>To:</B></I> <A > href=3D"mai= > > lto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A></DIV> > > <DIV dir=3Dltr style=3D"FONT-SIZE: 11pt" <i><B>Subject:</B></I> RE: > [smar= > > tBridges] Cant log into units??</DIV></DIV> > > <DIV> </DIV> > > <DIV>Wow...this has me really stumped.</DIV> > > <DIV> </DIV> > > <DIV>If I get the client to do a "restore to factory default", then > I can= > > log</DIV> > > <DIV>right in.</DIV> > > <DIV> </DIV> > > <DIV>If I wirelessly use simpleDeploy on the airPoints (airBridges > down a= > > llow</DIV> > > <DIV>this), then I can log right into the units.</DIV> > > <DIV> </DIV> > > <DIV>Otherwise, I can not log in. I get this error message "Can not > Read = > > the</DIV> > > <DIV>airBridge Configuration...Check your password."</DIV> > > <DIV> </DIV> > > <DIV>Please...does anyone have a clue on what could be causing this?? > </DI= > > V> > > <DIV> </DIV> > > <DIV>Sully</DIV> > > <DIV> </DIV> > > <DIV>-----Original Message-----</DIV> > > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">smartBridges= > > [EMAIL PROTECTED]</A></DIV> > > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:smartBridg= > > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > > <DIV>Network</DIV> > > <DIV>Sent: Saturday, July 19, 2003 11:20 PM</DIV> > > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">[EMAIL PROTECTED] > > =2Eorg</A></DIV> > > <DIV>Subject: RE: [smartBridges] Cant log into units??</DIV> > > <DIV> </DIV> > > <DIV>BTW...I did not upgrade any of these units to the new BETA > firmware.= > > </DIV> > > <DIV>So...it's not that either.</DIV> > > <DIV> </DIV> > > <DIV>As a matter of fact, I haven't done anything to these units. I > bet t= > > hat</DIV> > > <DIV>a manual "restore to factory default" by the client would allow > me t= > > o</DIV> > > <DIV>log in again. But....being that the units are working still, I > reall= > > y</DIV> > > <DIV>don't want to bother the client.</DIV> > > <DIV> </DIV> > > <DIV>Sully</DIV> > > <DIV> </DIV> > > <DIV>-----Original Message-----</DIV> > > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">smartBridges= > > [EMAIL PROTECTED]</A></DIV> > > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:smartBridg= > > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > > <DIV>Network</DIV> > > <DIV>Sent: Saturday, July 19, 2003 11:11 PM</DIV> > > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">[EMAIL PROTECTED] > > =2Eorg</A></DIV> > > <DIV>Subject: RE: [smartBridges] Cant log into units??</DIV> > > <DIV> </DIV> > > <DIV>MORE INFO:</DIV> > > <DIV>Rebooting the devices with simpleNMS does NOT work. I still can > not = > > log</DIV> > > <DIV>into 75% of my units (aP, aPPo, aB, aBO).</DIV> > > <DIV> </DIV> > > <DIV>I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's > and a= > > P's</DIV> > > <DIV>are the only ones I can still wirelessly use simpeDeploy on). > Once I= > > </DIV> > > <DIV>reflashed them with simpleDeploy, I was able to log in as > normal wit= > > h</DIV> > > <DIV>simpleMonitor.</DIV> > > <DIV> </DIV> > > <DIV>1. simpleDeploy uses the ADMIN password. So...obviously, I know > my</= > > DIV> > > <DIV>passwords. So...please don't suggest bad password.</DIV> > > <DIV> </DIV> > > <DIV>2. I have simpleNMS loaded with my ADMIN passwords as well, and > I am= > > </DIV> > > <DIV>able to see stats and perform reboots. Once again proving that > I kno= > > w</DIV> > > <DIV>all my passwords.</DIV> > > <DIV> </DIV> > > <DIV>3. MRTG is polling the units every 5 minutes with the USER > passwords= > > =2E</DIV> > > <DIV>One last time proving that I know my passwords.</DIV> > > <DIV> </DIV> > > <DIV>So....why am I all of a sudden unable to log into 75% of my > units (v= > > ery</DIV> > > <DIV>old and very new units)?!?!?!</DIV> > > <DIV> </DIV> > > <DIV>Why does reflashing them with simpleDeploy fix the problem??? > </DIV> > > <DIV> </DIV> > > <DIV>About 30 of my units are aB or aBo's, so I cant use > simpleDeploy to = > > fix</DIV> > > <DIV>the problem.</DIV> > > <DIV> </DIV> > > <DIV>Anyone have any suggestions???</DIV> > > <DIV> </DIV> > > <DIV>Sully</DIV> > > <DIV> </DIV> > > <DIV> </DIV> > > <DIV> </DIV> > > <DIV> </DIV> > > <DIV> </DIV> > > <DIV>-----Original Message-----</DIV> > > <DIV>From: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">smartBridges= > > [EMAIL PROTECTED]</A></DIV> > > <DIV>[<A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:smartBridg= > > [EMAIL PROTECTED]</A>] On Behalf Of The Wirefree</DIV> > > <DIV>Network</DIV> > > <DIV>Sent: Saturday, July 19, 2003 9:58 PM</DIV> > > <DIV>To: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">[EMAIL PROTECTED] > > =2Eorg</A></DIV> > > <DIV>Subject: [smartBridges] Cant log into units??</DIV> > > <DIV> </DIV> > > <DIV>For some odd reason, I can not log into a lot of my units > using</DIV= > > > > > <DIV>simpleMonitor. I have tried both the admin and user passwords > as wel= > > l.</DIV> > > <DIV> </DIV> > > <DIV>To add to the oddness, simpleNMS is able to talk with all the > units<= > > /DIV> > > <DIV>(obtaining their stats, etc). But when I choose MANAGE (which > opens<= > > /DIV> > > <DIV>simpleMonitor--also using my ADMIN password), I get the "Can > not</DI= > > V> > > <DIV>read...check your password" crap.</DIV> > > <DIV> </DIV> > > <DIV>Same thing happens when I try to open it with simpleMonitor > directly= > > =2E</DIV> > > <DIV> </DIV> > > <DIV>More oddness....MRTG is polling the units just fine, obtaining > their= > > </DIV> > > <DIV>usage, RSSI and LQ...using the USER password.</DIV> > > <DIV> </DIV> > > <DIV>I am stumped. I don't know when this started...cause I don't > normall= > > y</DIV> > > <DIV>log into the units unless there is a problem. I had one that > wouldn'= > > t</DIV> > > <DIV>let me in today, so I tried all of them.</DIV> > > <DIV> </DIV> > > <DIV>To recap...I can not log into over half of my units (about 35 > of the= > > 45)</DIV> > > <DIV>using either the ADMIN or USER password</DIV> > > <DIV> </DIV> > > <DIV>What the heck I am doing wrong....duh....am I forgetting > something</= > > DIV> > > <DIV>really stupid???</DIV> > > <DIV> </DIV> > > <DIV>Sully</DIV> > > <DIV> </DIV> > > <DIV> </DIV> > > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > t-15.org</A> (in the body type subscribe</DIV> > > <DIV>smartBridges <yournickname></DIV> > > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > art-15.org</A> (in the body type unsubscribe</DIV> > > <DIV>smartBridges)</DIV> > > <DIV>Archives: <A href=3D"http://archives.part- > 15.org">http://archives.pa= > > rt-15.org</A></DIV> > > <DIV> </DIV> > > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > t-15.org</A> (in the body type subscribe</DIV> > > <DIV>smartBridges <yournickname></DIV> > > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > art-15.org</A> (in the body type unsubscribe</DIV> > > <DIV>smartBridges)</DIV> > > <DIV>Archives: <A href=3D"http://archives.part- > 15.org">http://archives.pa= > > rt-15.org</A></DIV> > > <DIV> </DIV> > > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > t-15.org</A> (in the body type subscribe</DIV> > > <DIV>smartBridges <yournickname></DIV> > > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > art-15.org</A> (in the body type unsubscribe</DIV> > > <DIV>smartBridges)</DIV> > > <DIV>Archives: <A href=3D"http://archives.part- > 15.org">http://archives.pa= > > rt-15.org</A></DIV> > > <DIV> </DIV> > > <DIV>The PART-15.ORG smartBridges Discussion List</DIV> > > <DIV>To Join: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > t-15.org</A> (in the body type subscribe smartBridges > <yournickname>= > > ;</DIV> > > <DIV>To Remove: <A href=3D"mailto:[EMAIL PROTECTED] > 15.org">mailto:[EMAIL PROTECTED] > > art-15.org</A> (in the body type unsubscribe smartBridges)</DIV> > > <DIV>Archives: <A href=3D"http://archives.part- > 15.org">http://archives.pa= > > rt-15.org</A></DIV> > > <DIV>.</DIV></TD></TR> > > <TR> > > <TD id=3DINCREDIFOOTER width=3D"100%"> > > <TABLE cellSpacing=3D0 cellPadding=3D0 width=3D"100%"> > > <TBODY> > > <TR> > > <TD width=3D"100%"></TD> > > <TD id=3DINCREDISOUND vAlign=3Dbottom align=3Dmiddle></TD> > > <TD id=3DINCREDIANIM vAlign=3Dbottom > align=3Dmiddle></TD></TR></TBODY></T= > > ABLE></TD></TR></TBODY></TABLE><SPAN id=3DIncrediStamp><SPAN > dir=3Dltr><F= > > ONT face=3D"Arial, Helvetica, sans-serif" > size=3D2>______________________= > > ______________________________<BR><FONT face=3D"Comic Sans MS" > size=3D2><= > > A href=3D"http://www.incredimail.com/redir.asp? > ad_id=3D309&lang=3D9">= > > <IMG alt=3D"" hspace=3D0 src=3D"cid:B3158432-043F-4B3D-8547- > 58FEDE5308B5"= > > align=3Dbaseline border=3D0></A> <I>IncrediMail</I> - > <B>Email has= > > finally evolved</B> - </FONT><A > href=3D"http://www.incredimail.com/redir= > > =2Easp?ad_id=3D309&lang=3D9"><FONT face=3D"Times New Roman" > size=3D3>= > > <B><U>Click > Here</U></B></FONT></A></SPAN></SPAN></FONT></BODY></HTML> > > --------------Boundary-00=_B5QGLVC0000000000000-- > > > > --------------Boundary-00=_B5QGQL80000000000000 > > Content-Type: image/gif; > > name="IMSTP.gif" > > Content-Transfer-Encoding: base64 > > Content-ID: <B3158432-043F-4B3D-8547-58FEDE5308B5> > > > > > R0lGODlhFAAPALMIAP9gAM9gAM8vAM9gL/+QL5AvAGAvAP9gL////wAAAAAAAAAAAAAAAAA > AAAAA > > > AAAAACH/C05FVFNDQVBFMi4wAwEAAAAh+QQJFAAIACwAAAAAFAAPAAAEVRDJSaudJuudrxl > EKI6B > > > URlCUYyjKpgYAKSgOBSCDEuGDKgrAtC3Q/R+hkPJEDgYCjpKr5A8WK9OaPFZwHoPqm3366V > KyeRt > > > E30tVVRscMHDqV/u+AgAIfkEBWQACAAsAAAAABQADwAABBIQyUmrvTjrzbv/YCiOZGmeaAQ > AIfkE > > > CRQACAAsAgABABAADQAABEoQIUOrpXIOwrsPxiQUheeRAgUA49YNhbCqK1kS9grQhXGAhsD > BUJgZ > > > AL2Dcqkk7ogFpvRAokSn0p4PO6UIuUsQggSmFjKXdAgRAQAh+QQFCgAIACwAAAAAFAAPAAA > EEhDJ > > > Sau9OOvNu/9gKI5kaZ5oBAAh+QQJFAAIACwCAAEAEAANAAAEShAhQ6ulcg7Cuw/GJBSF55E > CBQDj > > > 1g2FsKorWRL2CtCFcYCGwMFQmBkAvYNyqSTuiAWm9ECiRKfSng87pQi5SxCCBKYWMpd0CBE > BACH5 > > BAVkAAgALAAAAAAUAA8AAAQSEMlJq7046827/2AojmRpnmgEADs= > > > > --------------Boundary-00=_B5QGQL80000000000000-- > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > > > Laurence Laforga > TIRGON Communications, LLC. > dba Waipahu.Net Wireless Broadband > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > Laurence Laforga TIRGON Communications, LLC. dba Waipahu.Net Wireless Broadband The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
