If PC is on the same subnet as the device, after ping, check the arp -a,
make sure the Mac & IP correspond to the device. Also use the attached
Apsearchmgr (run in DOS) to see if the info return is correct. It is for
searching device running on the same subnet in your network. Pls show me
the info captured by the Apsearchmgr.

Alex
sB Tech Support
 
 


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell
Sent: Saturday, July 26, 2003 2:30 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] "Invalid Device!" message...


Yes, I can ping the units just fine.  I included a transcript of the
network traffic between one of the airBridges and the box I'm comming
from so you can see.  I'm sending ICMP packets to the unit, and their
comming back...

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of sB Tech Support
Sent: Friday, July 25, 2003 5:38
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] "Invalid Device!" message...


Hi Shawn,
Please ensure that you can PING or search the device before upgrading
the firmware on the airBridge. Please remember that the device required
to cool down (if it is heat related issue) about 15 minutes before
upgrading the new firmware. Thank you.

Seeni, SB support

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell
Sent: Friday, July 25, 2003 2:44 PM
To: 'smartBridges'
Subject: [smartBridges] "Invalid Device!" message...

I'm getting this message also while trying to upgrade two airBridge's
remotely... and I keep getting the error message of "Invalid Device!"

the airPoints upgraded just fine...  but the airBridges won't upgrade...
any suggestions?


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Attachment: APSearchMgr.zip
Description: Zip compressed data

Reply via email to