RE: [smartBridges] More AB Total issues

[Laurence Laforga]

I”ve really haven’t had problems with our APPO…this one still came with the 50’ of outdoor cat5…it’s this ABTotal line that’s driving me nuts…   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sevak Avakians Sent: Friday, July 25, 2003 1:38 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] More AB Total issues   I've seen this same issue on APPO units.  Usually, I just keep trying and it will finally let me in.  I've since upgraded to the 1.08 version and will test it out today to see if it still does that. Sevak On Fri, 2003-07-25 at 07:27, Laurence Laforga wrote: Seeni, I restored the device to factory defaults and reconfigured the unit again. Still wouldn't associate and had the same error about WEP and authentication so I rebooted the pc...now, when I try to log in, it tells me that I'm trying to log in as administrator using a user's password. I didn't even change the password! It's still the default "public".   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of sB Tech Support Sent: Friday, July 25, 2003 1:04 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] More AB Total issues   Laurence, I hope that you are using firmware 0.01.07 on aBT.  If you are getting this message continuously, please restore the device (hardware reset-hold for 20 seconds) to factory defaults and then reconfigure the unit again. If above method doesn't resolve the issue, please reboot the PC and reconfigure again.   Please update us the status. Thank you.   Seeni, SB support   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Laurence Laforga Sent: Friday, July 25, 2003 4:59 PM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] More AB Total issues   Okay, found some old posts and did power cycle...actually I did a couple of 'em and finally it associated with the APPO...but...I couldn't even ping the APPO or anything else on the main network for that matter...however I could ping the ABTotal....then after about 10-15 minutes, I lost association again. Now I'm back to the first error message saying "Unable to associate..Please check authentication and WEP".       -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Laurence Laforga Sent: Thursday, July 24, 2003 10:28 PM To: [EMAIL PROTECTED] Subject: [smartBridges] More AB Total issues   I've got another AB Total that doesn't want to associate with our APPO. It's got the latest firmware and it keeps telling me "Unable to associate....Please check Authorization and WEP" The APPO is set for MAC authentication and our AB Indoor associates fine with the latest firmware.   Does anyone have any suggestions? When searching for APs, it shows our APPO with link qual of 85%.   Thanks!     The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org      The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org      The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org        The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org