These values are close approximate to the actual values. We are trying to have a better algorithm to indicate more accurate vales. BTW, do use you the same 15dbi antenna on sB radio when comparing RSSI value?
Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, July 26, 2003 1:25 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] AirBridge dBm RSSI Readings That is all fine and good, but when I plug a 15dbi antenna into my PCMCIA card, and associate to a cell site, MAX dBm I will see is -55dBm if I am VERY close to the tower. Now I throw in a SB radio, it shows -10dBm. That is OBVIOUSLY not correct. On Sat, 26 Jul 2003, sB Tech Support wrote: > It is derived from base band processor. By default, the MAX_RSSI for > smartBridges radios is 40 and is used for calculation of the Roaming > threshold and other parameters in the operation of the channel. The > different values are also used for RSSI in a relative manner for other > functions. For the purpose of representation, the MAX_RSSI is scaled > as per the Radio to show a percentage value. In doing dBm conversion, > the same would range from -95 dBm to -10 dBm. > > Alex > sB Tech Support > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Saturday, July 26, 2003 12:06 AM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] AirBridge dBm RSSI Readings > > > This may have been discussed before, but I missed it. Where the hell > do the dBm numbers come from that are reported by the SmartBridges > gear. There is NO WAY some of my links are operating at -17dBm. Anyone > from SB care to chime in here? > > Jeremy > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
