I should have included the full description of the setup. Here goes... >From the top down,
** On the Tower ** - Maxrad 90 Degree sector antenna - 2 foot LMR 240 jumper - Teletronics 250mW SmartAMP - about 80-90 feet of LMR400 ** Inside the radio shack ** - Teletronics DC Injector (power for the AMP) - Lightning Arrestor - 8 foot LMR 400 jumper - 1 foot LMR 195 pigtail - AirPoint Indoor The tower is about 85 feet tall. Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Jerry Olney > Sent: Wednesday, July 30, 2003 12:36 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Max output of APPO > > > At 12:32 PM 07/30/2003 -0700, you wrote: > > >The Teletronics SmartAMP will take any input from 0db up to > >20db and amplify it to 250mW, and will adjust the input level > >down so that it wont put out more than 250mW (24 db). The 2.5 db > >loss is approximated for the 2 feet of LMR 240 and the two connectors, > >and the antenna is rated at 14.5 db gain. > >Kevin Summers > >KISTech Internet Services Inc. > >www.kistech.com > > Kevin, > > How do you handle feeding power to the amp? With only 2 foot of cable I > would assume the amp is mounted outdoors near the antenna. Are > you feeding > the amp with the aPPO ? > > Jerry > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
