If you upgrade the firmware with cool units then you will not have this
problem like Ethernet port lost.  We have tested this firmware in our
LAB and few customer sites and did not encounter the same there.
Normally it would happen when applying the firmware in the heat unit.
If the Ethernet port lost means, there is no fix available for that. 
In this case, please RMA this unit.

Seeni, SB support


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ayo Ajayi
Sent: Friday, August 08, 2003 1:40 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] Firmware fix and now Ethernet port dead?

Yes, I did let it cool. I left it unplugged overnight and applied the
fix
early morning when it is coolest.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Billy Huddleston
Sent: Thursday, August 07, 2003 5:21 PM
To: [EMAIL PROTECTED]

Did you allow time for the aBO to cool down prior to applying the
firmware?
If you applied it while it was hot, I belive that would cause the system
to
loose the ethernet port.

Thanks, Billy

----- Original Message ----- 
From: "Ayo Ajayi" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 07, 2003 1:15 PM
Subject: [smartBridges] Firmware fix and now Ethernet port dead?



I'm new on this list so please pardon me if I'm going over old hat.

I installed an aBO towards the end of May and endured the periodic lack
of
association. When it became bothersome, I went to the SmartBridges web
site
to see if this was an isolated case or a widely reported problem. I
realized
that SB was already aware of the problem and has a firmware fix for it.
I
dutifully applied the fix after letting the radio cool. The fw update
reported successful but now I can't reach the airBridge anymore. I've
taken
it down, and it shows the Ethernet port no longer lights up. I've tried
to
reset it several times but nothing doing. How can a solution cause such
a
huge problem? What do I do now? Has anyone seen this?

Grateful for all ideas.  Thanks.

....Ayo

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to