Yes, I did let it cool. I left it unplugged overnight and applied the fix early morning when it is coolest.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Billy Huddleston Sent: Thursday, August 07, 2003 5:21 PM To: [EMAIL PROTECTED] Did you allow time for the aBO to cool down prior to applying the firmware? If you applied it while it was hot, I belive that would cause the system to loose the ethernet port. Thanks, Billy ----- Original Message ----- From: "Ayo Ajayi" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 07, 2003 1:15 PM Subject: [smartBridges] Firmware fix and now Ethernet port dead? I'm new on this list so please pardon me if I'm going over old hat. I installed an aBO towards the end of May and endured the periodic lack of association. When it became bothersome, I went to the SmartBridges web site to see if this was an isolated case or a widely reported problem. I realized that SB was already aware of the problem and has a firmware fix for it. I dutifully applied the fix after letting the radio cool. The fw update reported successful but now I can't reach the airBridge anymore. I've taken it down, and it shows the Ethernet port no longer lights up. I've tried to reset it several times but nothing doing. How can a solution cause such a huge problem? What do I do now? Has anyone seen this? Grateful for all ideas. Thanks. ....Ayo The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
