We do not have the accurate value. But you can refer
to this doc http://www.wildpackets.com/elements/whitepapers/Converting_Signal_Strength.pdf
for reference and understanding. Anyone has better source?
Alex
sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ole Bj�rklund
Sent:
Thursday, August 14, 2003 5:40 AM
To:
'[EMAIL PROTECTED]'
Subject: RE: [smartBridges] AirBridge dBm RSSI
Readings
Does you have an accurate value of what the dBm should
be when
getting 40 from the unit?? (like 20 30 40
whatever dbm?)
Regards
Oleb
-----Original Message-----
From: sB Tech Support [mailto:[EMAIL PROTECTED]
Sent: 13. august 2003 22:42
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] AirBridge dBm RSSI
Readings
The RSSI display in percent will be more accurate to
indicate how strong
the signal is. The internal formula to dbm conversion
is not accurate
(eg.100% is -10dbm) and that is the reason we came out
the option to
allow user to define their own conversion table. SO
you can set like
100% equal to -45dbm, etc.. which is similar to other
vendor dbm
reading.
Alex
sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of
[EMAIL PROTECTED]
Sent: Thursday, August 14, 2003 3:34
AM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges] AirBridge dBm RSSI
Readings
Has there been a resolution to this yet? I just did an
install that is
reporting a signal level of -10dbm.
The latest firmware allows you to punch in your own
values for dbm
levels, but this hardly helps to provide an accurate
measurement of
signal level.
On Fri, 25 Jul 2003 [EMAIL PROTECTED]
wrote:
> This may have been discussed before, but I missed
it. Where the hell
do
> the dBm numbers come from that are reported by
the SmartBridges gear.
> There is NO WAY some of my links are operating at
-17dBm. Anyone from
SB
> care to chime in here?
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe
smartBridges <yournickname> To Remove:
mailto:[EMAIL PROTECTED] (in
the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe
smartBridges <yournickname> To Remove:
mailto:[EMAIL PROTECTED] (in
the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
** This message does not contain any viruses - scanned
by Elektron and
Webconnect virusscanner **
** This message does not contain any viruses - scanned
by Elektron and Webconnect virusscanner **
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://archives.part-15.org
