|
Dennis,
Marlon has
told you correctly about not installing your equipment on the AM tower
site. It is something that
apparently
you have not researched quite enough or have had some very bad advise provided
to you.
It appears,
too, that you have not spoken with the Station Engineer yet, from your
statements. If so, then he is not telling
you what he
should be. Even it the structures themselves are not base-fed, (i.e.
"hot"), and are used to support the
vertical
radiators, the induced RF will likely cause some very odd problems to your
equipment. Anything located
in the
near-field of the radiators will be "rf hot" and difficult to
handle.
Recognizing
the alternative you have is not the best available either, it still is better
than what you think will be good here.
You do not
want to do this, unless the AM site is "dark" and will not be resurrected in the
future.
Last thing:
if you are still having to amplify the output to cover the desired area, due to
foliage absorption problems,
it
likely will not benefit you enough for all the effort needed to get it
accomplished.
Good luck in
your endeavors, but don't waste good time trying to use a AM facility unless you
ARE the Station
Engineer and
know what the pitfalls are and are capable of accomplishing the steps to
overcome them.
Ron
|
- RE: [smartBridges] Radio Station Towe... Tim Foster
- Re: [smartBridges] Radio Station Towe... Marlon Schafer \(509-982-2181\)
- RE: [smartBridges] Radio Station ... Scott Damron
- Re: [smartBridges] Radio Stat... Blazen Wireless
- Re: [smartBridges] Radio Station ... Dennis Burgess
- RE: [smartBridges] Radio Stat... beckman
- Re: [smartBridges] Radio ... Dennis Burgess
- Re: [smartBridges] Radio Stat... Martin Moreno
- Re: [smartBridges] Radio ... Dennis Burgess
- Re: [smartBridges] Radio Station ... Dennis Burgess
- Re: [smartBridges] Radio Stat... RFMS
- Re: [smartBridges] Radio ... Dennis Burgess
- Re: [smartBridges] R... Marlon Schafer \(509-982-2181\)
- Re: [smartBridge... Dennis Burgess
- Re: [smartBridge... Dennis Burgess
- Re: [smartBridges] Radio Station Towe... jparr
- Re: [smartBridges] Radio Station ... Dennis Burgess
- RE: [smartBridges] Radio Station Towe... beckman
- Re: [smartBridges] Radio Station Tower Martin Moreno
- Re: [smartBridges] Radio Station Tower Stuart Pierce
- Re: [smartBridges] Radio Station Tower Stuart Pierce
