|
Thanks for that – I neally bought the wrong one tonight. Most -----Original Message----- Hi Rob Cleminson, An 18 V DC plug is an ideal and
sufficient plug however you have to make sure that the polarity of the plug
should as specified in the website. http://www.smartbridges.com/new/products/ps.php Few customers are using Motorola
Canopy Powershot which is 24V and it is same pin as sB. Also you can use the following
powersupply, however you need to change the Pin polarity as stated in the
specification. Brand: Mouser Model: 552-PSA-31U-180 [EMAIL PROTECTED] To help you procure the correct
power supply adapter, the specification of the power adapter is :-
Thank you Seeni, SB support -----Original Message----- Hi, I just purchased my first Airpoint
Pro Outdoor – Powered it up fine on my desk. Just got down from installing on my
tower – I have 100Metres of CAT5 and now no power is arriving at the
unit? Is this because I am using the
standard 12V AC Adapter and because of the extra cable length now need 15V.
There is a note in the booklet suggesting that this is best but I am not sure
if it is a MUST Any advice? Regards Rob Cleminson |
<<image001.gif>>
