/me scared me and eje are agreeing a lot lately.
Chris
-----Original Message-----
From: Eje Gustafsson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 19, 2003 1:53 AM
To: Nish Park
Ok. Why two cables ?? since it's a 802.3af complaint unit then your
only running ONE cable from it with power and data in the same cable.
Why not run ONE cable TO it with power and data as well ?? The less
holes we have to drill in customers houses the better of we are from
liability. Besides it's not like your gaining anything by doing 2
cables to the outside PoE unit from the inside.
Best regards,
Eje Gustafsson mailto:[EMAIL PROTECTED]
The Family Entertainment Network http://www.fament.com
Phone : 620-231-7777 Fax : 620-231-4066
- Your Full Time Professionals -
--
NP> The photos are coming soon to help clarify.
NP> In short, you drill a hole in the exterior wall of the house to take out
NP> 2 cables, RJ45 for data and RJ11 cable for power. The PoE Outdoor mounts
NP> on the outside, near the hole and provides the lightning protection as
NP> well as power the radio on the roof. Hope this explains.
NP> (by the way I am a gypsy US citizen who has lived in many parts of the
NP> world :-)
NP> Nish
NP> -----Original Message-----
NP> From: [EMAIL PROTECTED]
NP> [mailto:[EMAIL PROTECTED]] On Behalf Of Martin Moreno
NP> Sent: Tuesday, August 19, 2003 12:53 PM
NP> To: '[EMAIL PROTECTED]'
NP> Subject: RE: [smartBridges] PoE Outdoor
NP> Nish,
NP> Maybe you did not understand homes in the United States don't have an
NP> electrical outlet on the roof or anywhere NEAR the radio? if you are to
NP> mount
NP> this thing near any outlet, most houses have then at the front door or
NP> back
NP> door of the house?? Is this unit designed to plug into an electrical
NP> outlet
NP> itself or does this just sit inline with the cat 5 with NO electrical
NP> connection to the outlet??
>>From what the PDF describes I envision this unit to plug into a wall
NP> outlet and
NP> feed power to the cat 5 to the radio and cat 5 to the client router /
NP> PC?
NP> Similiar to how the POE works now then you have 2 ground lugs that go to
NP> earth
NP> ground??
NP> Once again maybe if I have a picture to see I would understand but from
NP> what
NP> you are describing it will not work for us?
NP> Quoting Nish Park <[EMAIL PROTECTED]>:
>> That is precisely what it is designed for. It should be mounted
NP> outside
>> the building, at the point of entry. As it is required by the NEC -
NP> 801
>> and NEC - 802 It has large grounding lugs to divert the lightning
>> discharge. You will take 2 wires through the hole in the wall - RJ45
NP> for
>> data and RJ11 for power.
>>
>> Even though the name is PoE Outdoor, it has the additional
NP> functionality
>> of Lightning protection to meet the building code.
>>
>> Nish
>>
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]] On Behalf Of Martin Moreno
>> Sent: Tuesday, August 19, 2003 12:01 PM
>> To: '[EMAIL PROTECTED]'
>> Subject: RE: [smartBridges] PoE Outdoor
>>
>> Looks good but how will you make this work for lightening protection??
>> The
>> lightening protector has to be outside at the point of entry??
>> Am I missing something here? when was the last time you saw a power
NP> plug
>> next
>> to where you mount your radio? I am sure the customer will not go for
NP> an
>>
>> electrical extension cord going up to the roof? nor will I be running
NP> a
>> whole
>> electrical conduit run with J box for an outlet that would not be
>> feasible
>> monetarily nor time wise??
>> There for it is going to be INEFECTIVE I sure as heck don't want
>> lightening
>> should it strike to run down the line in the house burning everything
NP> on
>> its
>> way BUT HEY the POE stopped if from going into the rest of the house
>> should it
>> happen to have survived the ensuing fire that started from the
>> insulation,
>> drywall and wood burning where the cable ran through the wall.
>>
>> Once again maybe I am just not seeing how this thing works? is there a
>> diagram
>> or something other then the PDF doc that just tells about it?
>>
>>
>>
>>
>>
>>
>> Quoting The Wirefree Network <[EMAIL PROTECTED]>:
>>
>> > Very Sweet!!
>> >
>> > Thanks sB for continuing to improve upon your product line!
>> >
>> > I for one do like the idea of a ONE-STOP-SHOP for all my WISP needs!
>> >
>> > Sully
>> >
>> > -----Original Message-----
>> > From: [EMAIL PROTECTED]
>> > [mailto:[EMAIL PROTECTED]] On Behalf Of sB Tech Support
>> > Sent: Monday, August 18, 2003 7:03 PM
>> > To: [EMAIL PROTECTED]
>> > Subject: [smartBridges] PoE Outdoor
>> > Importance: High
>> >
>> > smartBridges is set to launch the PoE Outdoor in the coming days .
NP> The
>> > PoE Outdoor is a IEEE 802.3af compliant Power over Ethernet
NP> solution,
>> > with advanced protection and diagnostic features.
>> >
>> > For a brief review of the features brought to you by the PoE
NP> Outdoor,
>> > please refer the attached document.
>> >
>> > Alex
>> > sB Tech Support
>> >
>> >
>>
>>
>> Martin Moreno
>> Blazen Wireless
>> 909-907-4106
>> www.blazenwireless.com
>> The PART-15.ORG smartBridges Discussion List
>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>> smartBridges <yournickname>
>> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>> smartBridges)
>> Archives: http://archives.part-15.org
>>
>> The PART-15.ORG smartBridges Discussion List
>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
NP> smartBridges
>> <yournickname>
>> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>> smartBridges)
>> Archives: http://archives.part-15.org
>>
NP> Martin Moreno
NP> Blazen Wireless
NP> 909-907-4106
NP> www.blazenwireless.com
NP> The PART-15.ORG smartBridges Discussion List
NP> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
NP> smartBridges <yournickname>
NP> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
NP> smartBridges)
NP> Archives: http://archives.part-15.org
NP> The PART-15.ORG smartBridges Discussion List
NP> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
NP> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
NP> Archives: http://archives.part-15.org
--
[This E-mail scanned for viruses by Declude Virus]
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
