----- Original Message -----
Sent: Monday, August 18, 2003 10:24
PM
Subject: RE: [smartBridges] PoE
Outdoor
Smartbridge please rethink before final runoff wouldn't a POE
-> Outdoor POE be the best solution ? 1 cable but 2 part POE that way
theres only network cable all the way inside? Just my view but am I the only
one that sees that as a optimal way of doing this? I might be just going loco
if so ignore me.
Chris
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 19, 2003 1:54 AM
To: [EMAIL PROTECTED]
Didn't you read his post? He said that the POE device
sits at the point of
entry, and there are two wires
going through the hole into the house. One is
an
RJ-45 for data, and the other is an RJ-11 for power. My guess is that
there
is is probably a wall wart inside the house with
an RJ-11 plug on it that feeds
the POE.
Therefore, there's no need to have a plug near the radio.
However, it will be a pain to have to run two cables into the
house in some
installations. If the computer is
just on the other side of the wall, that
will be easy,
but if it takes an elaborate cable run inside the house to get to
the PC, it will be a pain.
Craig
Quoting Martin Moreno <[EMAIL PROTECTED]>:
> Nish,
>
> Maybe you did not understand homes in the United States don't have
an
> electrical outlet on the roof or anywhere NEAR
the radio? if you are to mount
>
> this thing near any outlet, most houses have then at the front
door or back
>
> door of
the house?? Is this unit designed to plug into an electrical outlet
>
> itself or does this just
sit inline with the cat 5 with NO electrical
>
connection to the outlet??
>
> >From what the PDF describes I envision this unit to plug into
a wall outlet
> and
>
feed power to the cat 5 to the radio and cat 5 to the client router / PC?
> Similiar to how the POE works now then you have 2
ground lugs that go to
> earth
> ground??
>
>
Once again maybe if I have a picture to see I would understand but from
what
>
> you are
describing it will not work for us?
>
>
>
>
> Quoting Nish Park
<[EMAIL PROTECTED]>:
>
> > That is precisely what it is designed for. It should be
mounted outside
> > the building, at the point
of entry. As it is required by the NEC - 801
> >
and NEC - 802 It has large grounding lugs to divert the lightning
> > discharge. You will take 2 wires through the hole
in the wall - RJ45 for
> > data and RJ11 for
power.
> >
> >
Even though the name is PoE Outdoor, it has the additional
functionality
> > of Lightning protection to
meet the building code.
> >
> > Nish
> >
> >
> > -----Original
Message-----
> > From:
[EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]
On Behalf Of Martin Moreno
> > Sent: Tuesday,
August 19, 2003 12:01 PM
> > To:
'[EMAIL PROTECTED]'
> > Subject: RE:
[smartBridges] PoE Outdoor
> >
> > Looks good but how will you make this work for lightening
protection??
> > The
> > lightening protector has to be outside at the point of
entry??
> > Am I missing something here? when
was the last time you saw a power plug
> > next
> > to where you mount your radio? I am sure the
customer will not go for an
> >
> > electrical extension cord going up to the roof? nor will I be
running a
> > whole
>
> electrical conduit run with J box for an outlet that would not be
> > feasible
> >
monetarily nor time wise??
> > There for it is
going to be INEFECTIVE I sure as heck don't want
>
> lightening
> > should it strike to run down
the line in the house burning everything on
> >
its
> > way BUT HEY the POE stopped if from
going into the rest of the house
> > should it
> > happen to have survived the ensuing fire
that started from the
> > insulation,
> > drywall and wood burning where the cable ran
through the wall.
> >
> > Once again maybe I am just not seeing how this thing works?
is there a
> > diagram
> > or something other then the PDF doc that just tells about
it?
> >
> >
> >
> >
> >
> >
> > Quoting The Wirefree Network
<[EMAIL PROTECTED]>:
> >
> > > Very Sweet!!
> > >
> > > Thanks sB
for continuing to improve upon your product line!
>
> >
> > > I for one do like the
idea of a ONE-STOP-SHOP for all my WISP needs!
>
> >
> > > Sully
> > >
> > >
-----Original Message-----
> > > From:
[EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED]]
On Behalf Of sB Tech Support
> > > Sent:
Monday, August 18, 2003 7:03 PM
> > > To:
[EMAIL PROTECTED]
> > > Subject:
[smartBridges] PoE Outdoor
> > > Importance:
High
> > >
>
> > smartBridges is set to launch the PoE Outdoor in the coming days .
The
> > > PoE Outdoor is a IEEE 802.3af
compliant Power over Ethernet solution,
> > >
with advanced protection and diagnostic features.
>
> >
> > > For a brief review of
the features brought to you by the PoE Outdoor,
>
> > please refer the attached document.
>
> >
> > > Alex
> > > sB Tech Support
> >
>
> > >
>
>
> >
> >
Martin Moreno
> > Blazen Wireless
> > 909-907-4106
> >
www.blazenwireless.com
> > The PART-15.ORG
smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe
> > smartBridges
<yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
> > smartBridges)
> > Archives: http://archives.part-15.org
> >
> > The PART-15.ORG
smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe
> smartBridges
> > <yournickname>
> > To
Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe
> >
smartBridges)
> > Archives: http://archives.part-15.org
> >
>
>
> Martin Moreno
> Blazen
Wireless
> 909-907-4106
> www.blazenwireless.com
> The
PART-15.ORG smartBridges Discussion List
> To Join:
mailto:[EMAIL PROTECTED] (in the
body type subscribe smartBridges
>
<yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
