Just setup a ping like morton host alive and ping all the units every couple min. mortons also emails you (or your cell) if the host goes down.

FYI, there is also a known issue with the APPo and tranzeo cpe's. Pinging fixes this.

Eric




Peter Cartwright wrote:


Nish,

One of our "problem" units (a new AirBridge Total) that kept regularly
losing association has been good as gold this past week, ever since I
started leaving SimpleMonitor running on a remote computer with link status
logging for that unit.  I read another post a day or so ago from someone who
seemed to do something similar to "teach" his units to behave themselves!
Could it be that this might be the lead everyone is looking for into the
"losing association" issue?  If doing something like this keeps the units
associated, then I can only assume it is keeping the firmware away from a
"bad" bit of code.

Is there something that SmartBridges could knock up that would allow us to
gather link status logging information for multiple units (using the exact
same method as SimpleMonitor does now)?  If this works, it could provide us
all with an effective workaround until the exact issue is resolved.

Another thought...

I have been finding that I can (contrary to my initial thinking) often
re-associate manually by using the Site Survey tab of SimpleMonitor (only
works if I happen to be at a customer site when it is down of course).
However, I generally have to hit the "refresh" button twice before the
available APs show up.  Is this significant, I wonder.

How does the firmware code differ when searching for available APs when it
loses association versus via the Site Survey "refresh" tool?

Peter

Loop Scorpio Ltd
providers of Ledbury Broadband and Highnam Broadband
www.ledburybroadband.co.uk
www.highnambroadband.co.uk


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to