I set mine to ping each radio 3 times every 1 min. Seems to have worked wonders.
Do this, or change the AP to something like Tranzeo (with good code). My next step.
Hope this helps. Eric
Peter Cartwright wrote:
Eric,
Thanks - where can I find this?
Would love to try it out, though not sure if it will be enough since I already leave SimpleNMS running which I assume does something similar.
Peter
Loop Scorpio Ltd providers of Ledbury Broadband and Highnam Broadband www.ledburybroadband.co.uk www.highnambroadband.co.uk
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Eric Calkins Sent: 24 August 2003 18:24 To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Auto-polling to keep units associated
Just setup a ping like morton host alive and ping all the units every couple min. mortons also emails you (or your cell) if the host goes down.
FYI, there is also a known issue with the APPo and tranzeo cpe's. Pinging fixes this.
Eric
Peter Cartwright wrote:
Nish,
One of our "problem" units (a new AirBridge Total) that kept regularly losing association has been good as gold this past week, ever since I started leaving SimpleMonitor running on a remote computer with link
status
logging for that unit. I read another post a day or so ago from someone
who
seemed to do something similar to "teach" his units to behave themselves! Could it be that this might be the lead everyone is looking for into the "losing association" issue? If doing something like this keeps the units associated, then I can only assume it is keeping the firmware away from a "bad" bit of code.
Is there something that SmartBridges could knock up that would allow us to gather link status logging information for multiple units (using the exact same method as SimpleMonitor does now)? If this works, it could provide
us
all with an effective workaround until the exact issue is resolved.
Another thought...
I have been finding that I can (contrary to my initial thinking) often re-associate manually by using the Site Survey tab of SimpleMonitor (only works if I happen to be at a customer site when it is down of course). However, I generally have to hit the "refresh" button twice before the available APs show up. Is this significant, I wonder.
How does the firmware code differ when searching for available APs when it loses association versus via the Site Survey "refresh" tool?
Peter
Loop Scorpio Ltd providers of Ledbury Broadband and Highnam Broadband www.ledburybroadband.co.uk www.highnambroadband.co.uk
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
