I can ping the repeater from the radius server. The simple monitor version is 1.5. The AP and repeater are running 1.4.j.8. The repeater AP IP address is setup in the radius server.
> Hi Kevin, > > To authenticate thru the repeater, the radius server and repeater AP > should be able PING each other thru wirelessly. May I know the > simpleMonitor version which you are using in repeater AP and primary > AP? In the radius server, repeater IP address should be entered as a > radiius client with secret password. > > Seeni, SB support > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Montgomery > Sent: Wednesday, August 27, 2003 6:55 PM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] Repeater and Radius > > Does anyone know if radius authentication works with an APPO in repeater > mode. We have an installation where the main AP is using radius > authentication and works fine but the repeater will not try to > authenticate clients to the radius server. If we dissable the > authentication on the repeater then clients can connect and work. Any > suggestions? > > Kevin D. Montgomery > Solutions IT Consulting > 135 S. Madison Ave > Cookeville, TN 38501 > ofc: 931-528-9010 > cell: 931-265-4035 > > ".. I haven't lost my mind... it's backed up on disk somewhere!" ANNOUNCEMENT WISPCON IV - Can You Ping Me Now? Good! October 27-29, 2003 - Dallas Texas http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm WISP 101 Boot Camp September 29-October 3, 2003 - Chicago, Illinois http://www.part-15.org/train/wisp/101.html The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
