Thanks. I just found that page too. Dan
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 21, 2003 11:56 PM Subject: Re: [smartBridges] Looking for Range and Spread of Airpoint Pro Total > 13dBm Flat Panel. Beam width of 28 degrees, greater than 18dBm front to > back ratio. > > Straight from the web site. > > Jeremy > > On Sun, 21 Sep 2003, Virtual North wrote: > > > Hi Folks. I'm about to do my first Airpoint Pro Total install. I'm not using > > any external antenna - just the integrated one. > > > > I've looked through the setup instructions but can't find any reference to > > the spread of the integrated antenna. What the spread like over distance? Is > > it the same spread closer in? I asked my supplier and he said 90 degrees but > > to be sure I went looking but couldn't confirm this. > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
