How do you add an omni antenna to a APP total ????
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Virtual North Sent: Monday, September 22, 2003 3:03 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Looking for Range and Spread of Airpoint Pro Total Thanks Mike. Given that its not 90 degrees ;-), I figure I'll probably add on an omni-directional antenna - the homes it this area are spread over about 200 degrees with only a couple of places out side of this. What I really would like for this access point is about a 3-4 km range; more would be nice but not an absolute must. Dan Good Winnipeg River Access Project ----- Original Message ----- From: "Mike Brownson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 22, 2003 12:04 AM Subject: Re: [smartBridges] Looking for Range and Spread of Airpoint Pro Total > The internal antenna is 13dB gain. Typicaly 13dB antennas have about > a 30 degree beam. But the beam of the antennas has nothing to do with > the range, except gain and beamwidth are related. In order to > calculate range you need to know what is on both sides. We have a > path calculator on our web site at www.ecommwireless.com or > Smartbridges has on on their site too. The range will also vary > greatly depending on what speed you are looking for since the sB > radios have almost 10dB difference in receive sensitivity between > 11Mbps and 1Mbps. > > If you are using the aPPT as an access point then the antenna is > likely to be a bit narrow beam for most applications. > > Mike B > Electro-comm > > P.S. If you need help with understanding the path calculations call > one of our reps. > > <snip> > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
