If this is an aPPT with an external jack, that would be SWEET. That is...IF it has 2 radios in it.
I would love to use the aPPT to shoot back to my head-end, then come out of it to an external sector PANEL at my repeater locations. Would save me from having to mount 2 radios. I have been asking for this since they FIRST came out with the "repeater" idea in one box. I did see the new aPPo with 2 external antenna jacks with 2 internal radios...but that would require 2 antennas. Still a good solution...but for ease, I would like to just mount one radio (box) and one antenna. sB...is that what this customer has in hand?? Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Proctor Sent: Monday, September 22, 2003 9:20 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Looking for Range and Spread of Airpoint Pro Total I haven't seen any of those, yet. That doesn't mean that we don't have them. It just means I haven't seen it, yet. The only reason I asked if you had bought it from us, was that if you had, I was ready to swap the unit for you to do what you wanted if necessary. I would agree. If it has a connector, you should be able to nail another antenna to it. I might suspect that you would need to go to the advanced tab in SimpleMonitor and select the antenna port, though, to re-route your RF to the correct antenna. Kevin B. Proctor Customer Service Internet and International Orders Electro Comm Distributing Inc 5015 Paris St Denver CO 90239 USA Phone: +1-303-371-8182 800-525-0173 FAX: +1-303-371-8158 800-423-8018 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Virtual North Sent: Monday, September 22, 2003 8:48 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Looking for Range and Spread of Airpoint Pro Total Hi Kevin. No I didn't buy the APPT from you. This is one of the newer units and it has an external antenna jack. The documentation says " .... Using a high gain external Omni / Directional antennas, it can provide range of upto 32 Kilometers and provides data rates upto 11Mbps ... " so I am assume that using an external antenna along with the integrated antenna is fine. Dan Good, WRAP ----- Original Message ----- From: "Kevin Proctor" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 22, 2003 8:31 AM Subject: RE: [smartBridges] Looking for Range and Spread of Airpoint Pro Total > You don't. You can use any antenna you want to with the APPT as long as > what you want to use is the integrated 13dbi antenna. > > Did you buy that from us? > > Kevin B. Proctor > Customer Service > Internet and International Orders > Electro Comm Distributing Inc > 5015 Paris St > Denver CO 90239 > USA > > Phone: +1-303-371-8182 > 800-525-0173 > FAX: +1-303-371-8158 > 800-423-8018 > [EMAIL PROTECTED] > > <snip> ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
