----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, September 26, 2003 7:43 PM Subject: Re: [smartBridges] Slow down problems
> I don't understand this question? what do you mean are all the radios on the > backhaul SB?? I am not using any SB product for backhaul I am using Canopy > for that. The canopy plugs into the same switch as the other two APPO's at > the main tower and all my clients (ABO's) are associated to either the north > or south facing APPO's > Its been a while since I tested throughput with my laptop associated to one > of the APPO's at the tower while sitting under it but I do run throughput > tests on the Canopy and it says I am getting roughly 4.3 megs down (uploads > to the tower) and 1 meg or so down (from the tower) uploads from the > clients. > > Maybe that clears it up? > OK Guys - start trimming the messages - we don't need 60 copies of the trailer. For what it's worth I have (without trouble) Canopy SM -> Cisco 350AP -> ABO's, ABT's Canopy SM -> Linksys Switch -> APPO -> ABO's, ABT's Canopy SM -> Netgear Switch -> APPO -> ABO's, ABT's The SM's are at 100M Full going to the switches. Mark ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
