We tried a Linksys switch, and a few other brands. All of them linked to the ABs and APs at 10Mbit Full Duplex. My guess is that throughput for those clients on the APPOs doesn't exceed 2.5 megabit back to the NOC.
Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Mark Radabaugh > Sent: Friday, September 26, 2003 5:14 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Slow down problems > > > > ----- Original Message ----- > From: "Blazen Wireless" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, September 26, 2003 7:43 PM > Subject: Re: [smartBridges] Slow down problems > > > > I don't understand this question? what do you mean are all the radios on > the > > backhaul SB?? I am not using any SB product for backhaul I am > using Canopy > > for that. The canopy plugs into the same switch as the other > two APPO's at > > the main tower and all my clients (ABO's) are associated to either the > north > > or south facing APPO's > > Its been a while since I tested throughput with my laptop associated to > one > > of the APPO's at the tower while sitting under it but I do run > throughput > > tests on the Canopy and it says I am getting roughly 4.3 megs down > (uploads > > to the tower) and 1 meg or so down (from the tower) uploads from the > > clients. > > > > Maybe that clears it up? > > > > OK Guys - start trimming the messages - we don't need 60 copies of the > trailer. > > For what it's worth I have (without trouble) > > Canopy SM -> Cisco 350AP -> ABO's, ABT's > > Canopy SM -> Linksys Switch -> APPO -> ABO's, ABT's > > Canopy SM -> Netgear Switch -> APPO -> ABO's, ABT's > > The SM's are at 100M Full going to the switches. > > Mark > > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
