RE: [smartBridges] Smartbridge Configuration Issue

[Tushar Patel]

I strongly suggest you to replace ABO with APPO. You will see really wired MAC cashing issues. We had same config for long time and kept running into minor issues. Finally changed the ABO with APPO(it is full bridge) and never saw any problem. $100 will go long way to improve quality of your life.   Tushar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Robin McCaig Sent: Wednesday, October 22, 2003 4:44 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Smartbridge Configuration Issue I got a tower in place that has 2 smartbridge radios hung on it.  The first radio is a Air Bridge Outdoor attached to a 24 dbi grid that is talking to a POP 3.5 miles away.  On the other side of the tower, I have a AirPointPro Outdoor attached to a 95 degree Sector Antenna pointing toward wireless clients.   The radios are connected to each other using a 4 port hub and one client computer is also connected to that same hub.   The network looks like this:   POPàABOàhubàAPPOàclients                      The problem is that right now all the clients are using a common IP Subnet as the ABO (10.6.0.12, 255.255.248.0, POP Gateway 10.6.0.1).  I have several devices behind the APPO and wondered if I could stick a Cisco 2514 (2 ethernet ports, first one being on the 10.6.0.0 network, and the second on the 192.168.1.0 network) between the ABO and the APPO and hand the clients DHCP IP addresses generated by the router in the 192.168.1.1 255.255.255.0 subnet   Technically will this work using my current equipment?   Thanks, Robin