You could use CB-aP combination in order to repeat the signal, or an aB-aP combination,
Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: Tuesday, October 28, 2003 7:05 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Set up Question Ah, repeater! I'm having one of those days. ;-) I haven't been to the sites yet. From what I gather it's about 6 miles to the T-1 to the tower. The other 2 I don't know yet, but I'll be there on Wednesday. It's a chemical plant and 2 of their mine shafts. Thanks, Dan Petermann Wyoming.com At 06:02 AM 10/28/2003 +0800, you wrote: >Hi Dan, > >In the 1st scenario the aPPO will be used as a repeater and not in CB >mode, if you are planning to use the CB mode then you will have to have >another AP retransmitting the signal. > >I hope that clarifies your question, > >BTW what is the approx distance for each of the link, from T1 to Tower >and then Tower to clients in 2 different locations? > >Best Regards, > >Vasu > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann >Sent: Tuesday, October 28, 2003 5:48 AM >To: [EMAIL PROTECTED] >Subject: [smartBridges] Set up Question > >I have a customer who wants to network his office with 2 other >locations. >They are out in the middle of nowhere, no los between any location but >they all >have los to a tower we have access to. > >The main office has a T-1. This will be a private network. > >The 2 scenarios I have come up with is: > >1. T-1 ---- APPO ----> APPO in C/B mode -------> ABO (2 in different >locations). > >2. T-1 ---- APPO ----> ABO === ethernet === APPO -----> ABO (2 in >different >locations). > (The bad thing about this set up is if the ABO on the tower looses >association you > have to be on the other side of it to reboot remotely, this site >is >140 miles from the office.) > >Is there any other setup I should be aware of? > >Thanks, > >Dan Petermann >Wyoming.com > > >----------ANNOUNCEMENT---------- >Don't forget to register for WISPCON IV >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org > >----------ANNOUNCEMENT---------- >Don't forget to register for WISPCON IV >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
