So what is the best setup for me? I have two Airbridge Pros and a Dlink 900+. The link is Ten Miles. Fiber SB - AP Mode SB - Wireless Repeater DWL - Wireless Client Client This is what I figure is the correct way to do it. Some assistance/thoughts would be appreciated.
Carl ----- Original Message ----- From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 28, 2003 8:20 AM Subject: RE: [smartBridges] Set up Question > > You could use CB-aP combination in order to repeat the signal, or an > aB-aP combination, > > Vasu > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann > Sent: Tuesday, October 28, 2003 7:05 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Set up Question > > Ah, repeater! I'm having one of those days. ;-) > > I haven't been to the sites yet. From what I gather it's about 6 miles > to > the T-1 to the tower. > The other 2 I don't know yet, but I'll be there on Wednesday. It's a > chemical plant and 2 of their mine shafts. > > Thanks, > > Dan Petermann > Wyoming.com > > > At 06:02 AM 10/28/2003 +0800, you wrote: > >Hi Dan, > > > >In the 1st scenario the aPPO will be used as a repeater and not in CB > >mode, if you are planning to use the CB mode then you will have to have > >another AP retransmitting the signal. > > > >I hope that clarifies your question, > > > >BTW what is the approx distance for each of the link, from T1 to Tower > >and then Tower to clients in 2 different locations? > > > >Best Regards, > > > >Vasu > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann > >Sent: Tuesday, October 28, 2003 5:48 AM > >To: [EMAIL PROTECTED] > >Subject: [smartBridges] Set up Question > > > >I have a customer who wants to network his office with 2 other > >locations. > >They are out in the middle of nowhere, no los between any location but > >they all > >have los to a tower we have access to. > > > >The main office has a T-1. This will be a private network. > > > >The 2 scenarios I have come up with is: > > > >1. T-1 ---- APPO ----> APPO in C/B mode -------> ABO (2 in different > >locations). > > > >2. T-1 ---- APPO ----> ABO === ethernet === APPO -----> ABO (2 in > >different > >locations). > > (The bad thing about this set up is if the ABO on the tower > looses > >association you > > have to be on the other side of it to reboot remotely, this > site > >is > >140 miles from the office.) > > > >Is there any other setup I should be aware of? > > > >Thanks, > > > >Dan Petermann > >Wyoming.com > > > > > >----------ANNOUNCEMENT---------- > >Don't forget to register for WISPCON IV > >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > >The PART-15.ORG smartBridges Discussion List > >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >smartBridges <yournickname> > >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > >smartBridges) > >Archives: http://archives.part-15.org > > > >----------ANNOUNCEMENT---------- > >Don't forget to register for WISPCON IV > >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > >The PART-15.ORG smartBridges Discussion List > >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >smartBridges <yournickname> > >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > >smartBridges) > >Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
