Re: [smartBridges] ABO and firewalls

Rick Kunze Fri, 31 Oct 2003 07:22:15 -0800

I've got many other customers running this exact same setup.

Rk

At 12:55 AM 10/31/2003, you wrote:

In my experience you can't use an airBridge (indoor) to connect your
firewall to your AP. For that you need an airPoint in Client Bridge mode.
Internet traffic will not pass if you use an AB even though you can ping
everything else.

See my reply to Microcell setup

----- Original Message -----
From: "Jeremy Oswalt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 31, 2003 2:10 AM
Subject: RE: [smartBridges] ABO and firewalls


> Are you using NAT or any internal IP's?  I run 10.0.0.0 on my network and
> have had issues with people running the same on their own internal
networks.
>
>   _____
>
> Jeremy
>
>   _____
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
> On Behalf Of Rick Kunze
> Sent: Thursday, October 30, 2003 8:57 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] ABO and firewalls
>
> I've got several other customers running exactly this same setup with no
> apparent problems.  So it's not simply the firewall it would appear.
>
> Rk
>
> At 05:21 PM 10/30/2003, you wrote:
> >Yup, I know exactly what it is. The Firewall is breaking it :-)
> >
> >-----Original Message-----
> >From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> >On Behalf Of Rick Kunze
> >Sent: Thursday, October 30, 2003 7:21 PM
> >To: [EMAIL PROTECTED]
> >Subject: [smartBridges] ABO and firewalls
> >
> >I seem to have a few problems.
> >
> >I've got a customer with an ABO, and like all my customers he has a
Linksys
> >BEFSR41 firewall.  The WAN port is static and public, the LAN is
> >192.169.1.1 and is static.
> >
> >There seems to be a problem passing traffic.  But if the firewall is
> >removed from the loop and it's WAN address assigned to the PC it works
> fine.
> >
> >I have this offending firewall here on my test bench now, hooked to yet
> >another ABO and it's doing the same thing.  I then replaced it with a new
> >Netgear (more features/expensive) firewall and this one also does the
same
> >thing.  That is, with either firewall in the loop it won't pass
> >traffic.  Yet from a PC on the private side of the firewall I can ping
both
> >the firewall (private) and the ABO (public), AND from a PC on my wired
> >Ethernet I can ping the ABO across the wireless.
> >
> >Anyone got a clue what this is all about?  Oh, and I've done the reset to
> >factory defaults on both devices MULTIPLE times.  Occasionally it works,
> >but most of the time it won't pass any traffic between the PC and my
tower
> >if there is a firewall in the loop.
> >
> >Thanks.
> >
> >Rk
> >
> >----------ANNOUNCEMENT----------
> >Don't forget to register for WISPCON IV
> >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname>
> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> >smartBridges)
> >Archives: http://archives.part-15.org
> >
> >----------ANNOUNCEMENT----------
> >Don't forget to register for WISPCON IV
> >http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname>
> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> >smartBridges)
> >Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>


----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org

Re: [smartBridges] ABO and firewalls

Reply via email to