Glad to hear that you are working on it. We were looking at going to Alvarion AP's, as they have a 24 db output. With a 12 db omni, that's about perfect. Kevin ----- Original Message ----- From: "Nimesh D. Parikh" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 12, 2003 12:46 AM Subject: RE: [smartBridges] Low power output
> We are working on the next generation radios that can do higher power. > For this generation radio it is not possible. > > Higher noise floor due to the AMP degrades the radio's performance. In > addition, the AMP have direction switching time that corrupts the > Pre-Amble of the Wi-FI frames, decreasing the stability of the network. > So overall we see many issues with the AMP and hence do not suggest the > use. > > Many of our customers have seen the stability of their network increase > when they design-out the AMP. > > Nimesh > sB > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Sam > Sent: Wednesday, November 12, 2003 10:24 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Low power output > > Alex > > Why not make the radios put out 100 mw? > > Sam > > > On Wed, 12 Nov 2003, sB Tech Support wrote: > > > At 17.5 dbm output power and with appropriate antenna, you can achieve > > long range and stay within FCC regulation. Using AMP is not > recommended > > by us as it introduces noise, unless there is special need for it. > > > > > > > > Alex > > > > sB Tech Support > > > > [EMAIL PROTECTED] > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Sullivan > > Sent: Wednesday, November 12, 2003 5:04 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] Low power output > > > > > > > > Smartbridges people, > > > > Why does the Smartbridges AP have such a low power output? At 56.2 > > milliwatts it has a lower trasmit power than most off-the-shelf AP's. > Is > > there any way up the power levels? > > > > Kevin > > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
