I fidn that if I constant ping everything I don't seem to have that problem but I have to ping the device on the LAN side of the ABO and most people have pings turned off but so far (cross my fingers) the ones I am able to ping have not had any problems this past week..
I find this as a problem that needs so more investigation.. ----- Original Message ----- From: "Pascal Losier" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 21, 2003 6:29 AM Subject: RE: [smartBridges] 1.08 locking up ??? Hi , We've all heard about 1.08 locking up... I have a link that was OK with 1.08 but it started working flawlessly. I have an APPO at the otherside of the link If I ping the AB wirelessly, it will always respond. If I ping the APPO sitting at the back, it will respond but will stop after a while. If I search with Airbridge monitor, it will wake up everything at the back of this bridge. If I run simple NMS...... This lockup never happens. Smartbridges could not have those lock up when testing, maybe it is simply because Simple NMS was running somewhere on their network.... (Just a clue). But those lock up in 1.08 are real. I got them. The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
