I am having some difficulty with this exact setup. I have the 2 Power Shots coupled together without a switch and it appears if both the CB and AP reboot at the same time the CB gets set back to default. I am ssuming because of the way the reset wires are connected? Anyone else seen this problem? I really want this setup to work as it is purley an outdoor enclosure and in Minnesota I will need it to be heated for the switch.
----- Original Message ----- From: "sB Tech Support" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 24, 2003 9:09 AM Subject: RE: [smartBridges] Repeater question > Hi John, > > The "repeater" setup is very popular in many WISP networks and so has > become a proven method of expanding the reach. The RJ45 coupler is > sufficient to connect the powerShots using straight cables which can be > changed to cross-over simply by changing the PoE's straight-cross > switch. The XO2 will be an ultimate choice for this kind of a deployment > and will be released in the very near future. > > Best regards, > > Arasu > sB Tech Support > > Visit us on the Web : http://www.smartbridges.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John K. McReynolds > Sent: Monday, November 24, 2003 10:44 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Repeater question > > > All, > We are getting ready to expand our network with a "repeater" setup. We > are > planning on using 2 APPO's...one in client bridge mode (for the > backhaul) and > the other in AP mode (for the obvious reasons). Here are my questions: > > 1) Has anyone done this and with what kind of success? > 2) Can we simply use an RJ45 coupler to connect the ethernet from each > PowerShot together? Or would it be best to use a switch or router??? > 3) If we can hook them together, would they need to be cross over cables > or > straight through? > > We were gonna wait for the X02s to come out, but time is of the > essence... > > > Many thanks in advance, > > JOHN > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
