I was wondering if the switch itself will heat the enclosure. ----- Original Message ----- From: "Brian Winter" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 24, 2003 5:18 PM Subject: Re: [smartBridges] Repeater question
> try a 3com office connect switch - generates enough of its own heat to fry > eggs (i would think many do) > > ----- Original Message ----- > From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 24, 2003 6:46 PM > Subject: Re: [smartBridges] Repeater question > > > > I am having some difficulty with this exact setup. I have the 2 Power > Shots > > coupled together without a switch and it appears if both the CB and AP > > reboot at the same time the CB gets set back to default. I am ssuming > > because of the way the reset wires are connected? Anyone else seen this > > problem? I really want this setup to work as it is purley an outdoor > > enclosure and in Minnesota I will need it to be heated for the switch. > > > > > > > > ----- Original Message ----- > > From: "sB Tech Support" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, November 24, 2003 9:09 AM > > Subject: RE: [smartBridges] Repeater question > > > > > > > Hi John, > > > > > > The "repeater" setup is very popular in many WISP networks and so has > > > become a proven method of expanding the reach. The RJ45 coupler is > > > sufficient to connect the powerShots using straight cables which can be > > > changed to cross-over simply by changing the PoE's straight-cross > > > switch. The XO2 will be an ultimate choice for this kind of a deployment > > > and will be released in the very near future. > > > > > > Best regards, > > > > > > Arasu > > > sB Tech Support > > > > > > Visit us on the Web : http://www.smartbridges.com > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of John K. McReynolds > > > Sent: Monday, November 24, 2003 10:44 PM > > > To: [EMAIL PROTECTED] > > > Subject: [smartBridges] Repeater question > > > > > > > > > All, > > > We are getting ready to expand our network with a "repeater" setup. We > > > are > > > planning on using 2 APPO's...one in client bridge mode (for the > > > backhaul) and > > > the other in AP mode (for the obvious reasons). Here are my questions: > > > > > > 1) Has anyone done this and with what kind of success? > > > 2) Can we simply use an RJ45 coupler to connect the ethernet from each > > > PowerShot together? Or would it be best to use a switch or router??? > > > 3) If we can hook them together, would they need to be cross over cables > > > or > > > straight through? > > > > > > We were gonna wait for the X02s to come out, but time is of the > > > essence... > > > > > > > > > Many thanks in advance, > > > > > > JOHN > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe smartBridges) > > > Archives: http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
