Actually it isn't that hard.
You can use pegboard for a large unit,
or drill your own masonite (tempered board) with finer holes for a
smaller unit.
Build a box with a hole for a home vac . Add support bars for the pegboard.
Now build 2 frames to fit over the box screwed together (since most glue
can't handle the heat) to hold the plastic
use a hinge to open them. Use small brads with the heads cut off and
sharpened to hold the sheets of plastic from slipping.
.. put it in the oven and bake until the plastic is soft.
move the frame over the part / box and vacuum.
JAMES EALY wrote:
Location for finding plans and info on making a vacuum box and where to find
plastic sheet?
TIA
Jim
--
Jeff Steifel
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
