The problem again here is that the Super 7 won't slave the trim of the other channel
to the aileron trim. The surfaces will
function correctly as ailerons, but when you move the aileron trim, only one surface
(the one plugged into channel 1) will move.
dave wrote:
> Try this
>
> V Tail will be on I think channel 2 and 4 and 1 of the ailerons will be
> on channel. Use one of the programmable mixers to mix channel 1 to
> channel 5 and set up the reverse to give the right throws.
>
> This will work but you will need to lock the channel 5 flap control into
> a set position or take the knob off.
>
> Dave
>
> 1so we have e <[EMAIL PROTECTED]>, Rick Brown and Jill Wiest
> <[EMAIL PROTECTED]> writes
> >Problem he is having, and I don't recall the programming of the Super 7
> >very well from memory anymore, is that in the one and only GLID menu,
> >channel 5 is still set up on the gear switch. This doesn't seem the way
> >I remember but I don't have the radio or a Super 7 manual in front of me
> >to check it all out. This gives either full servo throw one direction or
> >the other. I don't recall either if there is a way to disable this and
> >get channel 5 to be a proportional function.
> >
> >RB
> >
> >Brett Jaffee wrote:
> >>
> >> Unfortunately, there's not a built in feature in the radio that will allow
> >you to substitiue channel 5 for channel 6 (this feature
> >> was only just added to the 8UAFS, in fact). Perhaps you can do some sort of
> >mix between channel 6 (flaps) and channel 5? The big
> >> problem with custom PMIXs in the Super 7, though, is that you can't link the
> >trims together, as they would be in the pre-programmed
> >> mixes.
> >>
> >> Rick Brown and Jill Wiest wrote:
> >>
> >> > All,
> >> >
> >> > I have a question about programming a 4 servo 'v' tail HL sailplane
> >> > with a Futaba Super 7 radio. Can it be done using a 5 channel Rx. I have
> >> > a Futaba 8 channel and it is no problem.
> >> > I was doing my brother a favor and built him a HL, he wanted an ailreon
> >> > version, but now it looks as though he may not be able to program it
> >> > with his Super 7 using the Hitec 555 Rx. I did use a Super 7 a few years
> >> > ago to fly full house sailplanes, but then that was using a 7 channel
> >> > Rx.
> >> > Anybody know if it can be done? If not he is into buying a new Tx. I
> >> > really did him a favor. HA HA!
> >> >
> >> > RB
> >> > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
> >"unsubscribe" requests to [EMAIL PROTECTED]
> >>
> >> --
> >> _____________________________________________________________
> >>
> >> Brett Jaffee
> >> [EMAIL PROTECTED]
> >>
> >> http://home.earthlink.net/~jaffee
> >>
> >> The Unoffical Extra 300 Home Page
> >> http://www.bayarea.net/~nathan/extra300
> >>
> >> OnTheWay Quake 2 and 3 Server Utility
> >> http://www.planetquake.com/ontheway
> >> _____________________________________________________________
> >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
> >"unsubscribe" requests to [EMAIL PROTECTED]
>
> --
> dave
> RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
--
_____________________________________________________________
Brett Jaffee
[EMAIL PROTECTED]
http://home.earthlink.net/~jaffee
The Unoffical Extra 300 Home Page
http://www.bayarea.net/~nathan/extra300
OnTheWay Quake 2 and 3 Server Utility
http://www.planetquake.com/ontheway
_____________________________________________________________
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
