Am I wrong, or did this Horizon tech just say it was OK to change
crystals in a transmitter module?
> Karl & JeriLynn wrote:
>
> I have a JR 8103 transmitter and am currently on channel 17. I want to
get channel 22 crystals.
> Do I just need the crystal or..... do I need to get another module
which is tuned with a 22 crystal in it?
When in doubt, ask the experts ... as I did (see below).
-----
From: product support <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Subject:
Date: Thu, 28 Sep 2000 14:19:57 -0500
Andrew,
Thank You for your question. You do not have to send your transmitter or
receiver in to have them tuned. With the ABC&W circuitry, it allows us
to
center tune the equipment to a specific channel. You can in theory go
from
channel 15 to 59 and not have a problem. I recommend no more 20 channels
above or 20 channels below the original channel, and then range check
the
transmitter with the engine running and the engine off. If everything is
ok
after that then you should be set to go. If you have any further
questions
please call us toll free at 877-504-0233.
Thank You,
Horizon Product Support Team
----
Did I read this wrong?
Ed Franz
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
