--- Cesar Managad <[EMAIL PROTECTED]> wrote:
Then, I'll lay them
> down on my uncut template material, .02" thick
> phenolic material.
What is "phenolic material" and where does one
purchase it?
I used thin aircraft ply to make my terminator
templates following essentially the same procedure as
you outlined except I used thin CA before a final
sanding with 400 grit wet sandpaper. Came out really
smooth except one template had a void in the center
sandwich material and I couldn't get it smooth to the
fingernail. I finally hit on the idea of using a thin
coat of 5 minute apoxy to fill the void and coat the
top. However, for future templates I want to try a
material that is easeir to work with if possible. (too
many splinters and ugly cutting with the ply.) I used
a coping saw since I don't own a scroll saw or dremel.
(The dremel is on my wife's official christmas list
:-)
Thanks
John Gossett
Austin, Texas
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]