I believe if you leave the TX battery connected you can change the lithium without fear of losing any settings. I think I saw that in the manual.
Dennis ----- Original Message ----- From: "Robert (Bob) P. Andris" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 02, 2003 5:10 AM Subject: Re: Re: [RCSE] JR 8103 lithium battery failure question Andrew, What you say is always a good idea. However, it can be done by the consumer with some care. I recently got the "L" on one of my 8103s. The change over probably made it 'batteryless' for 10 to 15 min. Lo, and behold, the settings were still there. Maybe there is a big capacitor in there somewhere that will hold the voltage for a small period of time. Bob > >Date: Tue, 01 Apr 2003 13:29:01 -0500 >From: "Andrew E. Mileski" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: [RCSE] JR 8103 lithium battery failure question >Message-ID: <[EMAIL PROTECTED]> > >Karl Miller wrote: >> I have a JR 8103 Tx which is about 5 years old. I was wondering what happens >> when the lithium battery (which is the backup battery for the model memory >> and all data stored) fails. In the manual it says a flashing L will appear >> when the voltage drops below 2.2 volts.Then it also says if the lithium >> battery should fail all data will be lost and the Tx will not function. > >AFAIK, it has to be unlocked by a tech :( Hence changing the battery >yourself requires extreme care to avoid loss of power during the >process. > >-- >Andrew E. Mileski >Ottawa, Canada >http://isoar.ca/ -- ------------------------------------------------------------ Robert P. Andris 12155 Terrence Ave. Saratoga, CA 95070 USA (408) 252-5469 [EMAIL PROTECTED] LSF 004, AMA 5055 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIM E turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
