Wondering if someone could help or already had problems on trying to
get full flap servo travel on the 9cap for channel 5.
The plane is a brand new eraser xtreame dbox +tail, futaba 9cap,
futama PCM receiver and hitec 5125 digital servos. Mode is Glid2flp.
Here is the challenge, at least to me :). Before activating all
mixes, I assembled the right wing flap, connected to channel 3 to test
geometry and full deflection. Perfect 90 degrees ...looking ok, time for the
left flap..same thing, connect on channel 3 to test and 90 degree.
Both flaps tested !!! Ok, easy....now time to mount the plane and
start playing with the mixes. Right flap on channel 5, Left flap on channel
6, right aileron on ch1 and left on ch7.
Activating butterfly...here is the problem... can't find a way to
make the servos connected on channel 5 and 6 to have the same travel as when
they were connected on ch3. Seems like the 9cap limits the total travel on
channel 5 and 6.
Function "end point" only works at one end of the travel no effects
on the other. On butterfly, tried to set the flap to 100%, but at 60% the
servo is already at max travel...but mechanical, the servo still has a lot
of travel to go.
Tks in advance for those who might take their time to help.
Best Rgds,
Marlon
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
