Ira W. Snyder wrote: > On Tue, Feb 02, 2010 at 01:42:44AM +0600, Pavel B. Cheblakov wrote: >> From: Pavel Cheblakov <[email protected]> >> >> This driver is for CAN interface cards based on the PLX90xx PCI bridge. >> Driver supports now: >> - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) >> - Adlink PCI-7841/cPCI-7841 SE card >> - Marathon CAN-bus-PCI card (http://www.marathon.ru/) >> - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) >> >> Changes since v1: >> - Added some defines for static inline int plx_pci_check_sja1000(...) >> - static struct pci_device_id plx_pci_tbl[] replaced by >> static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) >> - Typo fixed >> > > Hello, > > Any ideas if this driver could support the Janz PCI CAN cards as well? I > don't have any documentation for the cards, and I'd love to get away > from their closed-source drivers.
Is it a passive or and intelligent CAN PCI card? What is the name of the card? A intelligent card will run its own firmware and you do not have direct access to the SJA1000. Pavel plx_pci driver is quite generic and it should not be a big deal to support a PLX90xx based passive card. Wolfgang. Wolfgang. _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
