Hi Again, I gues my explanation was a bit confusing.
The error led is allways on, also when the disk isn't connected. As far as I can see, to other gutys have had this problem: Net 4801: http://lists.soekris.com/pipermail/soekris-tech/2005-August/009014.html Net 4521: http://lists.soekris.com/pipermail/soekris-tech/2005-July/008850.html And also a simular problem, with a net4801 which has been working: http://lists.soekris.com/pipermail/soekris-tech/2006-July/010693.html I have tried to power cycle and reset it aswell. The power supply is bought from CortexSystems.dk, the one for all boards. Do I have a faulty board ? Mads N. Vestergaard skrev: > Hi There, > > I hav e anet4801, with a 2.5" drive connected, the problem is, it > doesn't look like it is booting. > > When ever the disk is connected, the red LED is turned all at all time, > depending on the jumper settings on the drive, the disk led is on for > 2-20 seconds. > > Unfortunately I haven't been able to get a signal through the serial > port, so do you guys have any suggestion sto solve the problem above. > > Thanks in advance. > > Mads > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
