Hi Voipcrazy, http://www.modemsite.com/56k/x2-hyperterm.asp
Search "characters twice". It's called a manual;). Bill On Wed, 2008-02-20 at 17:12 +0100, voip crazy wrote: > Thanks for your answers, but my problem persists, > > I think PXE boot works on my soekris, look thos tftpd log: > > Feb 20 16:51:17 localhost dhcpd: DHCPDISCOVER from 00:00:24:c9:5a:14 > via eth1 > Feb 20 16:51:17 localhost dhcpd: DHCPOFFER on 192.168.30.63 to > 00:00:24:c9:5a:14 via eth1 > Feb 20 16:51:18 localhost dhcpd: DHCPREQUEST for 192.168.30.63 > (192.168.30.253) from 00:00:24:c9:5a:14 via eth1 > Feb 20 16:51:18 localhost dhcpd: DHCPACK on 192.168.30.63 to > 00:00:24:c9:5a:14 via eth1 > Feb 20 16:51:18 localhost in.tftpd[3379]: RRQ from 192.168.30.63 > filename pxelinux.0 > Feb 20 16:51:18 localhost in.tftpd[3379]: tftp: client does not accept > options > Feb 20 16:51:18 localhost in.tftpd[3380]: RRQ from 192.168.30.63 > filename pxelinux.0 > Feb 20 16:51:25 localhost in.tftpd[3381]: RRQ from 192.168.30.63 > filename pxelinux.cfg/01-00-00-24-c9-5a-14 > Feb 20 16:51:25 localhost in.tftpd[3381]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:25 localhost in.tftpd[3382]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A81E3F > Feb 20 16:51:25 localhost in.tftpd[3382]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:26 localhost in.tftpd[3383]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A81E3 > Feb 20 16:51:26 localhost in.tftpd[3383]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:26 localhost in.tftpd[3384]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A81E > Feb 20 16:51:26 localhost in.tftpd[3384]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:27 localhost in.tftpd[3385]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A81 > Feb 20 16:51:27 localhost in.tftpd[3385]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:28 localhost in.tftpd[3386]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A8 > Feb 20 16:51:28 localhost in.tftpd[3386]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:28 localhost in.tftpd[3387]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0A > Feb 20 16:51:28 localhost in.tftpd[3387]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:29 localhost in.tftpd[3388]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C0 > Feb 20 16:51:29 localhost in.tftpd[3388]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:29 localhost in.tftpd[3389]: RRQ from 192.168.30.63 > filename pxelinux.cfg/C > Feb 20 16:51:29 localhost in.tftpd[3389]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:30 localhost in.tftpd[3390]: RRQ from 192.168.30.63 > filename pxelinux.cfg/default > Feb 20 16:51:48 localhost in.tftpd[3676]: RRQ from 192.168.30.63 > filename debian-installer/i386/boot-screens/boot.txt > Feb 20 16:51:58 localhost in.tftpd[3692]: RRQ from 192.168.30.63 > filename linux > Feb 20 16:51:58 localhost in.tftpd[3692]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:58 localhost in.tftpd[3693]: RRQ from 192.168.30.63 > filename linux.cbt > Feb 20 16:51:58 localhost in.tftpd[3693]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:58 localhost in.tftpd[3694]: RRQ from 192.168.30.63 > filename linux.0 > Feb 20 16:51:58 localhost in.tftpd[3694]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:58 localhost in.tftpd[3695]: RRQ from 192.168.30.63 > filename linux.com > Feb 20 16:51:58 localhost in.tftpd[3695]: sending NAK (1, File not > found) to 192.168.30.63 > Feb 20 16:51:58 localhost in.tftpd[3696]: RRQ from 192.168.30.63 > filename linux.c32 > Feb 20 16:51:58 localhost in.tftpd[3696]: sending NAK (1, File not > found) to 192.168.30.63 > > > But what I get on my soekris console is that > > CCoouulldd nnoo > tt ffiinndd kk > eerrnneell iimm > aaggee:: lliinn > uuxx > > bboooott:: > > I type "linux" as kernel image and it does not boot > > The caracters are writing twice and it cannot find the kernel image > version > > My <TFTP_Root>/pxelinux.cfg/default > > have a line like this SERIAL 0,19200 for console connection > > And the default image to boot is configured like that in the same file > > kernel linux > append vga=normal initrd=initrd.gz > console=ttyS0,19200n8 > ramdisk_size=14332 root=/dev/rd/0 rw -- > > > Why is this happening? > How sould I adjust my Hyperteminal? > > Thanks > > Best Regards. > > VoipCrazy > > > > _______________________________________________ > Soekris-tech mailing list > Soekris-tech@lists.soekris.com > http://lists.soekris.com/mailman/listinfo/soekris-tech -- "What's a computer?" - MES _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
