Hi Kim, I replaced a file in the netboot directory that tells the installer to send output to the console. Since I don't even get a boot menu or boot prompt, there's no possibility for me to append something to the kernel parameters. Robin
> -----Original Message----- > From: Kim Rostgaard Christensen [mailto:[EMAIL PROTECTED] > Sent: Wednesday, October 15, 2008 4:09 PM > To: Robin Kipp > Cc: [email protected] > Subject: Re: [Soekris] Installing Debian on the Net 5501 > > > Did you remember to append console=ttyS0,9600n8 (or similer) > to the kernel options? > > > On Wed, 15 Oct 2008 14:07:35 +0200 > "Robin Kipp" <[EMAIL PROTECTED]> wrote: > > > Hey again, > > OK, I've just had some success here, I found out where to > specify the > > boot file in the TFTPD32 DHCP server :-) Now, when I boot F0, I get > > the > > following: > > Intel UNDI, PXE-2.0 (build 082) > > > > Copyright (C) 1997,1998,1999 Intel Corporation > > > > VIA Rhine III Management Adapter v2.43 (2005/12/15) > > > > > > > > CLIENT IP: 192.168.0.3 MASK: 255.255.255.0 DHCP IP: 192.168.0.1 > > > > GATEWAY IP: 192.168.0.1 > > CLIENT MAC ADDR: 00 00 24 CA FF B8 > > > > > However, it goes completely silent then... What could I try next? > > Thanks! Robin > > > > > > _______________________________________________ > > Soekris-tech mailing list > > [email protected] > > http://lists.soekris.com/mailman/listinfo/soekris-tech > > best > -- > Kim Rostgaard Christensen > > BOFH excuse #75: > > There isn't any problem > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
