The drive mounting plate is screwed on to stand-offs that replace the screws used to mount the board to the case, so the disk is on top of the board. The power wire's other end has a connector like the one used to power floppy drives, connecting to a connector on the opposite side of the board from the DC input. Next to it on the board is the SATA connector. The 90 degree angled end of the SATA cable connects to the board. The other ends connect to the disk, obviously.
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
