I have several net 5501's with Rhino 8 and 24 port boards but max of 12 channels. No problems with the load. FXS may require an external power source.
Darrick ------Original Message------ From: Steve Holdoway Sender: [email protected] To: [email protected] Subject: Re: [Soekris] questions about using soekris for PBX Sent: Feb 20, 2009 8:19 PM On Sat, 21 Feb 2009 09:54:24 +0800 Pete Kay <[email protected]> wrote: > Hi, > > If I use soekris boards to build a PBX and I want to support 4 4-port > fxo/fso PCI card. Is it possible? > > What is the maximum number of card that can be supported? > > Thanks, > Pete > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech One 3.3V PCI card is possible... I'm trying to get one working with a digium tdm-400 ( because I've got one ). The 410 is supposed to be better ). Note that if you're using FXO extensions, you'll need to supply 12V to the card to ring the extensions. But that'll inly get you 4 ports. There are 8 and 24 port versions available, bit you may be asking for trouble with performance... Steve -- Steve Holdoway <[email protected]> _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech Sent from my BlackBerry® wireless device from U.S. Cellular _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
